DOT3 Automotive Brake Fluid Tester LCD Screen Bar Graph With Sound Alarm
VICTOR 2GF Automotive Brake Fluid Tester LCD Screen Bar Graph With Sound Alarm
Feature
1. Install one pcs of 9V(6F22) battery at the back of tester.
2. After inserting the battery, press POWER button to turn on the tester, all analog bars turns off with buzzer sounding,
indicates the product self-test is successfully finished.
3. Press DOT3, DOT4, DOT5.1 button to switch brake fluid type to test.
4. Get the probe into brake fluid, At this moment, the number of analog bars shows the water ratio in the liquid. When the
water ratio is more than 3%, the LCD screen backlight will turn red, and the buzzer will alarm that the brake fluid needs to be
replaced.
5. Press POWER button to turn off the tester.
Other Functions:
1. Mute function
Press the mute button to display the symbol “ ”, then the detector will not sound an alarm.
2. LCD backlight function
Press the backlight button, the white screen backlight to open, then press the backlight button to turn off the backlight.
3. Battery check
Press the power check button, the screen symbol “ ” turns on with the analog bar shows the remaining battery capacity.
4. Low voltage warning
When the battery power is low, the symbol “ ” automatically turns on to remind replacement of the battery as soon as
possible.
Note:
1. After use, please clean the probe and avoid any retention of stains that might affect the test.
2. If not to use for a long period of time, remove battey and store in a dry place at normal room temperature.
2GE |
2GF |
water content LED indicator detect |
water content LCD detect |
sound, light dual alarm function |
sound, light dual alarm function |
Brake fluid type to select (DOT3/DOT4/DOT5.1) |