10mA Hook Electric Power Tester Leakage Current For Monitoring Stations
VICTOR 7100B Hook Type Large Current Meter Cable Leakage Current Inspector AC 0~9999A ForSubstation Power plants Monitoring stations
Introduction
This hook type current meter is also called the hook type cable leakage detector. It consists of a large caliber hook ammeter, insulation rod
VICTOR 7100B | |
Function | ACA, leakage current, load current on-line test, suitable for electricity leakage patrol inspection of down hole and outdoor multi-conductor thick cable |
Power Source | DC 3.7V chargeable lithium battery, USB charging portal, working continuously for 10h |
Display Mode | Four digital LCD display, backlight function, suitable for dark place |
Tested Line Diameter | Ф168mm Conductor, cable or 168mm×245mm bus bar |
Measurement Range | Current: AC 10mA~9999A(50~60Hz automatically) |
Resolution | 10mA |
Current Accuracy | 10mA~999A, ±2%±5dgt |
1000A~2999A, ±3%±5dgt | |
3000A~9999A, ±4%±5dgt | |
Size of Insulation Rod | 300mm |
Instrument Size | Length width thickness 310mm×270mm×52mm |
Line Voltage | bare wire test 1000V below, less than 110kV with a safety insulation sheath wire. (operating with an insulation rod) |
Automatic Shutdown | About 15mins after startup, the instrument will be automatically shut down to reduce battery consumption |
Instrument Mass | Instrument: 496g(include battery); Total mass: 2.3kg (including insulation rod and instrument box) |