Pure Nickel Ni200 Ni201 Hastelloy C276 Plates For APV/SPX Heat Exchanger Series Cooling, Oil System

APV/SPX Heat Exchanger Plates

The reasons why heat exchanger plates need to be replaced frequently include the following:

Wear: After long-term use, the surface of the heat exchanger plates may be worn, affecting its heat transfer efficiency. Wear will cause the plate surface to be uneven and reduce heat transfer efficiency, so it needs to be replaced regularly.

Corrosion: Under some special working conditions, the plate may be affected by corrosion, reducing its corrosion resistance and service life. Plates affected by corrosion need to be replaced in time to ensure the normal operation of the heat exchanger.

Fouling: In some applications, dirt or sediment may accumulate on the surface of the plate, affecting heat transfer efficiency. Regular replacement of the plates can prevent this from happening and keep the heat exchanger running efficiently.

Maintenance and maintenance: Regular replacement of heat exchanger plates is also to maintain the good condition of the equipment and extend the service life of the equipment. By regularly replacing the plates, you can ensure stable performance of the heat exchanger and reduce the possibility of failure.

Therefore, regular replacement of heat exchanger plates is an important measure to ensure efficient operation of the heat exchanger and extend the life of the equipment.

Regular Heat Exchanger Plates Material

• AISI 304 is usually 0.4 or 0.5 mm thickness
• AISI 316 is always 0.5 and 0.6 mm
• 254 SMO (high alloy) typically 0.6 mm
• Titanium plates are always 0.5 and 0.6 mm
• Some have thicker plates (for high pressure applications)
• Some PHEs have 0.4 mm (low pressure operation)
• Hastelloy C-276 (nickel alloy) typically 0.6 mm

Applacations

The application areas of heat exchanger plates are as follows:

1. Widely used for Hotels

2. Garment Shops

3. Building Material Shops

4. Machinery Repair Shops

5. Manufacturing Plant

6. Food & Beverage Factory

7. Farms, Restaurant,Retail, Food Shop

8. Printing Shops, Construction works

9. Energy & Mining, Food & Beverage Shops

Q&A

1. Q: Are you a manufacturer or trading company?

A: We are a professional manufacturer of plate heat exchangers, plates, gaskets, plate mould with 18 years' experience.