1.Introduction:

The HD BaseT 4x4 HDMI Matrix with simultaneous CAT5e/6/7 and HDMI outputs connects four HDMI sources to eight displays.

This matrix features four HDMI outputs and each HDMI output is mirrored to provide a CAT-Cable output which runs simultaneously.

It supports the transmission of video (resolutions up to 1080p Full HD and 4Kx2K@30Hz) and supports high resolution digital audio formats

such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio.Connect a HD BaseT Receiver to each of the CAT-Cable outputs to extend the HDMI signal up to 328ft/100m (100m Version) or 230ft/70m(70m version)for multi-room connectivity.

It works with Blu-Ray players, Set-Top boxes, Home Theater PCs, and game consoles that connect to an HDMI display.

Any source is accessible at all times by any display by selecting it via the supplied IR Remote Control, RS-232, TCP/IP

or by using the selection buttons on the front panel. This device supports High Definition Audio, and 3D signal compatibility.

2.Features:

• HDMI1.4, HDCP 1.4 and DVI1.0 compliant；

• Supports HDMI 3D pass-through；

• Supports resolutions from VGA~WUXGA and HD resolutions from 480i~1080p~4Kx2K@30 dependent upon the EDID settings；

• Supports transmission distances up to 328ft/100m (100m Version) or 230ft/70m(70m version) through CAT5e/6/7 cable；

• Support POE fuction；

• Supports simultaneous HDMI and CAT outputs；

• Supports wideband IR(30-60Khz) matrix system, IR transport channel can be forward or backward；

• Supports RS-232, remote control, on-panel control and TCP/IP Control；

• Supports smart EDID management；

• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission；

• HDMI1.4 4X4 HDBaseT matrix switcher with 4 pcs of 70 meters and 100 meters HDMI HDBaseT receivers

3.Package Contents:

• HDMI1.4 4X4 HDBaseT matrix switcher ----------------------1pcs
• HD BaseT Receiver--------------------------------- 4pcs
• 12V/5A DC power adaptor-------------------------- 2pcs
• Operation Manual--------------------------------------1pcs
• Wideband IR Tx calbe---------------------------------4pcs
• Wideband IR Rx cable---------------------------------5pcs
• HDMI Matrix IR Remote-------------------------------1pcs
• Mounting ears---------------------------------------------2pcs
• RS232 cable---------------------------------------------- 1pcs

4.Specifications of the HDMI1.4 4X4 HDBaseT matrix switcher​ :

Video Bandwidth: 297MHz[10.2Gbps]

Support Video Resolution: 480i,576i,480p,576p,720p,1080i,

1080p24/30/50/60.4Kx2K@30;

Input Ports :4×HDMI, 5×IR Receiver, 1×RS-232,

1xRJ-45(Control),4x RS232

Output Ports :4×CAT5e/6/7, 4×IR Blaster, 4×HDMI

HDMI connector :Type A 19 pin female

RJ-45 connector :WE/SS 8P8C

3.5mm connector (TX and RX) IR Receiver/IR Blaster

ESD Protection Human-body Model:

± 8kV (Air-gap discharge)

± 4kV (Contact discharge)

Power Supply :12 V/5 A DC (US/EU standards,

CE/FCC/UL certified)

Dimensions: 440 mm (W)×200 mm (D)×45 mm (H)

Weight :1820 g

Chassis Material: Metal

Silkscreen Color :Black

Operating Temperature: 0 ºC~40 ºC/32 ºF~104 ºF

Storage Temperature :−20 ºC~60 ºC/−4 ºF~140 ºF

Relative Humidity: 20~90 % RH (non-condensing)

Power Consumption :30 W(max)/0.5w(Standby)

5. Connection diagram for HDMI1.4 4X4 HDBaseT matrix switcher​: