7U 4x4 3x5 3x4 2x2 3x3 DVI VGA SDI HDMI Video Wall Controller 16 Ch Output 18 Ch Input
HDMI Video Wall Controller Introduction:
type | Item | Detail parameters | ||||
chassis | 1 U | 2U | 3.5 u | 7U | 12.5U | |
Control board | 1 | 1 | 1 | 1 | 1 | |
Expansion slots | 1 | 1 | 3 | 1 | 1 | |
In/out card slots | 2 | 4 | 8 | 16 | 36 | |
Weight | 8.5KG | 11KG | 18KG | 31.5KG | 49KG | |
Dimension (L)*(W)* (H)cm | 58*45*21 | 60*54*20 | 62*63*30 | 60*54*47 | 63*59*74 | |
Board card | Input card | Various input CARDS can be combined arbitrarily: DVI-I board card (support compositevideo, DVI, HDMIL, component, VGA), 4K input card, SDI card, IP input. -STD boad, Information publishing board, etc | ||||
output card | HDMI Card(inbuilt audio),HDMI Card(inbuilt audio+3.5mm audio port) | |||||
Control | Communication method | Support TCP network control and serial port control; Support RS232 and RS485 loop out | ||||
CMS control | DIMP software | |||||
BS control | No need to install any client software | |||||
Cross-platform control | Support windows, IOS MACOS, Android, Linux |
HDMI video wall controller using application fields:
Main festures:
1. POP Picture Out Picture Mode: Multiple or part signals are displayed to full screen or part screen
in any rectangle shape, single panel can create 4 video windows at most.
Figure 2.2 POP Tile mode
2. Single screen can create 16 video windows at most: in the same whole screen, can set 4 CBD areas,
each CBD can open 4 windows, i.e. single screen can create 16 windows at most.
3. PIP mode: use certain one picture as background; the other video windows adopt tile mode.
4. Overlapping mode: use certain one channel as background, the other channels are also displaying
on the screen with the overlapping part invisible.
5.Scaling and Positioning: Size is scalable and position adjustable.
6. Edge shield technology: Under traditional splicing technology, when encountered with video wall
consisting of rear projector, Panel TV, LCD/PDP or DLP, CRT, as their pictures are spliced after being
divided and the adjacent displays cannot display the cutting edge because of the gaps, the overall picture
will become abnormal unnaturally.
Through refined pixel adjustment and the edge signal automatically extended, the edge covering part
is shielded to achieve a natural and intuitive viewing. During debugging, users only need to input in the
control software the size value of the display unit and the approximate width value of back edge,
it will automatically calculate the required shielding range and perform the mask with our unique techniques.
7. Edge fine-tuning technology: Make adjustment on single pixel of splicing screen edge through the
operation of the control software in order to reach seamless splicing. The technique is suitable for front projection,
rear projection, DLP display and so on.
8. User-defined modes: We offer abundant assignable modes function, there are 30 built-in user-defined modes,
and a lot of external user-assigned modes, and touch panel supported such as Crestron.
9.Image parameters (white balance/brightness/contrast/saturation) adjustment:
All the parameters are set as standard state when the goods leave the factory, users can adjust
it according to the actual need. For example, user can adjust the white balance of each output to
make the comprehensive white balance of TV wall/splicing wall reach a state as perfect as possible.
10. Background Logo display (customized requirement): available as a background logo display,
according to the demand of customer , we will store the segmentation images in the corresponding interfaces,
the background logo can be spliced into a complete image, each on-screen background logo can be activated
or deactivated and can be replaced freely as you need.
Using application:
7U 4x4 3x5 3x4 2x2 3x3 DVI VGA SDI HDMI Video Wall Controller 16 Ch Output 18 Ch Input