RF Tapper is a device which similar to directional coupler,it is used to split an input signal into
two parts for signal tapping out and main signal transmission,
RF Tappers have no isolation port ,so this cause RF tapper has no directivity.
Our RF Tapper has Low PIM and can reach -160.
Vinncom has variety of RF tapper with different frequency range and connector's types.
RF Tapper contains two frequency segments,three kinds of PIM.
Part Number | VN-TAP-019096-OPx-160 | ||||||
Operating Frequency ( MHz ) | 138-300/300-960 | ||||||
Tapper coupling(dB) | 5 | 6 | 7 | 10 | 12 | 20 | |
Coupling loss (dB) | ≤2.2 | ≤1.9 | ≤1.5 | ≤0.9 | ≤0.8 | ≤0.4 | |
VSWR | 1.33 | 1.25 | 1.25 | 1.20 | 1.20 | 1.20 | |
Coupling Tolerance(dB) | 138-300MHz | 6±1.0 | 6.6±0.8 | 7.8±0.6 | 10.2±0.6 | 12.2±0.6 | 20.2±0.6 |
300-960MHz | 5.5±0.6 | 5.5±0.8 | 6.8±0.6 | 9.5±0.5 | 11.5±0.5 | 19.8±0.6 | |
Impedance ( Ohm ) | 50 | ||||||
IM3 (dBc @ 2×43dBm) | - 160 | ||||||
Power Rating | 300 W | ||||||
Application | Indoor & Outdoor | ||||||
Degree of Protection | IP65 | ||||||
Operating Temperature ( ℃ ) | -35~75ºC | ||||||
Interface | 4.3-10 Female | ||||||
Dimension (mm)(L×W× H, excl connector) | 130*25*25 | ||||||
ROHS Compliance | Yes | ||||||
Remark | Install Bracket Include |