Transparent White Color 100% Pure PTFE Hollow Hose Tubing 4*6 Mm Use For Car Parts Control Cable

Description

extruded pipe and molded pipe using PTFE suspension polymerization process. In the known plastic PTFE has good chemical resistance and dielectric properties.

PTFE pusher tube selection Dispersion of PTFE resin made by plunger processing. It has the best chemical resistance and electrical properties in known plastics.

Specification

Main Properties

Application

widely used in machinery, chemical, aviation, electrical and electronics, defense industry, cutting-edge technology, medical, wire insulation sheathing, corrosive liquid medium pipe line, and health and electrical insulation and other fields.

Advantage

High and low temperature resistance

-180~220℃

Not sticky, waterproof, oilproof

Security and insulation

Under 60HZ60MHZ, dielectric constant is 2.1.

Even if firing, and it will still insulate.

Volume resistance > 10^18Ωm

Surface resistance > 2 X 10^13Ω

Voltaic Arc >165 seconds, insulation

Only under high temperature, fluorine and alkalis will have chemical reaction, no reaction with all of other thick

and thin inorganic acid, alkali, ester.

Low water absorption < 0.01%

Non inflammability

Non inflammability in air (oxygen index > 95 vol.%)

Non hazardous

With physical inertia

High transparency

Loest refractive index in plastic material

Weather resistance

Under ozone and sunshine for long time

Easy to process for second time

Self-close, self joining, flanging, and it can make into coil pipe

Special thin wall thickness PTFE tube with wall thickness 0.5 mm, 1 mm, 1.5 mm, 2 mm

Features

1 . Chemical insert

2 . High temperature resistance

3 . Continuous operating

4 . Temperature:-80℃-260℃

5 . Corrosion resistance(acid/alkali resistance, chemical reagents oil-proof), most of the chemicals and solvents, shown inertia, capability strong acid strong base water and various organic solvents.

6 . High pressure resistance

7 . High and low temperature and the use temperature of 250℃

8 . Good mechanical toughness, even if the temperature dropped to -196℃,can also keep 5% of elongation rate

9 . Climate resistance, plastics has the aging

10 . High lubrication is the solid material in the lowest coefficient of friction

11 . No adhesive is the solid material in the smallest surface tension, adhesion is not any substance

Package

Product Photos