Virgin Material PTFE Packing White Color Without Oil Size 25*25mm Length In Rolls

DESCRIPTION

PTFE packing is made of pure PTFE dispersion resin as raw material, made into raw material film, twisted into threads, and then woven into packing. This packing does not have any other additives, and can be widely used in alcohol, beverage, food, pharmaceutical, papermaking, chemical fiber, etc., which have high cleanliness requirements, and valves and pumps with strong corrosive media.

ADVANTAGE

1 High temperature resistant working temperature up to 250℃.

2 Low temperature resistant person has good mechanical toughness, even if the temperature drops to -196°C, it can maintain 5% elongation.

3 Corrosion resistance For most chemicals and solvents, it is inert, resistant to strong acids and alkalis, water and various organic solvents.

4 weather resistance has the best aging life in plastics.

5 High lubrication is the lowest friction coefficient of solid materials.

6 Non-adhesion is the smallest surface tension in solid materials, and does not adhere to any substance.

PACKING SERIES

carbon packing, PTFE packing, graphite packing, high water-based packing, aramid packing, aramid PTFE mixed packing, aramid carbon mixed packing, PTFE Ethylene split wire packing, PTFE packing, expanded PTFE packing, asbestos packing, carbon fiber packing, butter packing, oil-immersed asbestos packing, asbestos rubber packing, glass fiber packing, ceramics Fiber packing, nylon packing, composite fiber packing, ceramic packing and other products.

SPECIFICATION

3mm×3mm ~ 50mm×50mm

Special specifications or various non-standard products can be formulated according to customer requirements.

MAIN PROPERTIES OF PACKING

APPLICATION

INFORMATION ABOUT OUR FACTORY

Our Service
1) Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time.
2) Our working time is 7.30 AM --17:30 PM,Monday to Saturday.
3) General samples time can be arranged within 2--5days.
4) Orders will be produced exactly as request and approved samples.
5) When mass production,we send photos to show the production line.And confirm the estimate time again.
6) At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7) Before shipment,our QC will have inspection to make sure the quality.
8) We always try best to ensure every order to delivery in time.

Payment Terms
1) T/T,Cash,L/C.
2) 30% deposit,70% balance before shipment.
3) Lead time: 15 days after received deposited for 2tons.
4) Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.