Super Bass Class D Subwoofer Amplifier with DSP Function 2U Design Home Theater 1000W RMS Mono Amplifiers
Features of the Super Bass HiFi Subwoofer DSP amplifier
1.2U, high efficiency, class D design producing over 1000W of RMS power.
2.Large toroidal transformer to provide stable power supply.
3.This subwoofer power amplifier Built-in DSP, support program EQ setting by PC software and amplifier function button.
4.Firmware updates can be uploaded via the USB connector on PC.
5.Programming navigation control,used to scroll through the display menus, change setting and program the DSP controller. Offers kinds of EQ presets designed specifically for different speakers available.
6.Multi function of DSP: Volume control,subsonic control,crossover/frequency,corssover/slop,preset mode, phase control,auto off setting,mode select of USB and LFE, trigger selection of on and off,memory store and recall.
7.Support further customization, provides a 10-band parametric EQ to optimize sonic performance in any space.
8.Inputs include left/right high-level binding posts for use with speaker output signals, left/right RCA and Left/right balanced XLR's.
9.Offers kinds of EQ presets designed specifically for different speakers available.
10.The HIFI subwoofer power amplifier with Luxury aluminum front panel and display.
11.This Super bass power amplifier with 2 Rack mout ears are provided for rack mounting.
12.Audio On/Off Detects & 12VDC Trigger: A three way switch on the rear panel allows you to select the 12V trigger mode, auto on/off by music signal detect mode, or set to the always-on mode. The amp will also can be Choose from 5-30 minutes in 5 minute increments or turn the function off from the DSP menu.
Specification of the subwoofer power amplifier:
Product name | DSP-1000, solid subwoofer power amplifier |
Output power | 1000 watts at 4ohm |
THD at 1000W (4 ohm) | 0.07% |
THD at 1W (4 ohm) | 0.08% |
S/N Ratio | 100 dB Sub mode, 90 dB LFE mode |
Output noise | 1.5 mV Sub mode, 2 mV LFE mode |
Input sensitivity | 220 mv |
Frequency response | Sub mode: 10-204 Hz (adjustable subsonic and corssover) LFE mode: 10-2000 Hz (adjustable subsonic) |
High level input | 2.6 V |
Line output | 200 mV (gain of 0 dB) |
Product working voltage | AC 110/240V switchable |
Auto on sensitivity | 3.2 mV |
Auto shutdown time | Adjustable from 5 to 30 mins, 5 mins increments |
Standby power | <0.5W |
Panel material | Aluminum |
Net weight | 12. 4 KGs |
Dimension 1 | W425.5 X H89 X D368.5 mm (without feet and rack brackets) |
Dimension 2 | W483 X H101.5 X D368.5 mm (with feet and rack brackets) |
DSP Specification
Volume | Adjustable, -60 to + 10dB |
Subsonic filter | Adjustable, 24dB per octave, 20.3 to 40.5 Hz |
Crossover frequency | Adjustable, 39.4 to 204 Hz |
Cross slope | Adjustable, 12dB-48dB per octave, 6dB increments |
User EQ | 9 independent third frequencies (19.7 Hz - 125 Hz) with a -6dB/+3dB range |
DSP presets | 7 EQ presets set in factory (depends on the application) |
Phase | Adjustable from 0 to 315°, 45° increments |
Mode | Sub (crossover) or LFE |
Display mode | Enabled or disabled after 30 minutes of inactivity |
Mode Select Switch
Pictures of the DSP subwoofer amplifier: