Syringe Rubber Stopper On-line Detector Equipment with AI Algorithm

Inspection standards

Inspection principle

Our company's design plan uses 6 sets of high-pixel area array industrial cameras and high-performance strobe light sources, and conducts comprehensive inspections on the top, side, and bottom defects of the product. The design detection speed of the entire set of inspection equipment is 1000 pieces/minute. The equipment can operate 7*24 hours a day, and the unqualified products can be automatically eliminated online.

Vision solutions

The rubber plugs are accelerated by adding an air blowing device at the vibrating guide rail of the vibrating plate, so that the two rubber plugs can be spaced apart. The material speed is more unstable, and a stabilizing device is needed.

The position of the rubber plug is controlled by adding a stopper device so that the rubber plugs are arranged in an orderly manner. However, after the addition of a stopper device, the position of the rubber stopper can be controlled while the rubber plug itself produces a rotational movement, so that the discharge more stable.

Advantages of CCD inspection

• 
• Top surface area detection: The top surface of the rubber plug manager feeder is facing upwards, and it is suspended in the air through the negative pressure belt vacuum adsorption. A set of industrial cameras is installed directly below the rubber plug, and with the use of visual light source, the image of the top surface area of ​​the rubber plug is collected for inspection. Analytical processing.
• Bottom surface detection: install a set of industrial cameras directly above the rubber plug, and operate with visual light source
• 
• Use to collect the plane image of the bottom surface for analysis and processing.Detection of the outer side of the rubber plug: 4 sets of industrial cameras are arranged in a ring around the outer side of the rubber plug. With the use of visual light sources, the images do not interfere with each other, and the images around the outer side are collected for analysis and processing.

After-sale service

The company has a complete technical service team and rapid response mechanism, and has dedicated service specialists for each customer, who can receive technical consultation and fault reports from customers at any time. And to ensure rapid response to customer emergencies, to ensure that customers receive satisfactory service.During the epidemic or due to special reasons, when after-sales engineers are unable to reach the site, the service center can remotely adjust customer equipment for troubleshooting and technical consultation.

After the equipment arrives at the customer site, the after-sales engineer arrives in time to carry out equipment installation, commissioning, and operation training. The product quality of the whole machine is traceable, and the quality warranty period is 1 year from the date of acceptance. In the event of non-human faults during the warranty period, after-sales engineers will quickly arrive at the site or provide remote guidance for free maintenance.

Company profile

KEYETECH has always been committed to the application of artificial intelligence in the field of vision technology, replacing human eyes and brain decision with machine vision and AI reasoning calculations, and integrating the quality detection and sorting to industrial products in traditional manufacturing to make the production more digitization , Intelligence, visualization, and persistence. Also greatly improves the efficiency and accuracy of industrial detection, and enhances the intelligent level of the manufacturing industry.