ZM8115 MOBILE BED AND FLOW VISUALISATION UNIT Fluid Mechanics Lab Equipment

1. PRACTICAL DEMONSTRATION AND VISUALISATON CAPABILITIES

Ø ➤Mobile bed experiments

Ø ➤Flow around model engineering structures

Ø ➤Experimental investigation of erosion and deposition

Ø ➤Characteristics of meandering water courses

Ø ➤Two dimensional flow visualisation by the Ahlborn technique

Ø ➤Boundary layer suction demonstration

Ø ➤Velocity distribution in duct flow

Ø Hydraulic analogy to compressible flow

Ø Civil engineering model testing

Model: working length 4m

2. Basic Accessories

• Model bridge piers; two rectangular,four cylindrical, two profiled and twowith rounded ends.

• One asymetricalaerofoil shape.

• Two model gate guides.

• Eight aluminium baffles to direct thewater flow for general test purposes.One set of twelve x 50mm x 50mmaluminium Tees and six 40mm equal angles all 125mm long, to enable thelaboratory staff to build additionalmodels

3. TECHNICAL SPECIFICATION

• Working area: 2 metres x 610mmor 4 metres x 610mmMax water depth: 120mm

• Thickness ofsand bed: 60mm

• Flow range: 0-3.5 litres/sec.

• Sump capacity: 300 litres

• Accuracy offlow metering: ±1.5% of full scaledeflection

4. ORDERING SPECIFICATION

• A self contained recirculating watertank for flow visualisation and mobilebed studies.

• The tank is manufactured from glassreinforced plastic and all components in contact with water are of noncorrodingmaterials.

• The working section has minimumdimensions of (4m) x 610mm and the flow range is 0-3.5 litres/sec.

• Fifteen models and accessories are included as standard and a sheet of coloured glass allows rapid changeover from mobile bed to flow visualisation mode.

• All controls are housed in a portable console which includes a flexible cable and water safe connectors.

5. SERVICES REQUIRED Electrical supply:

S2-4M-A: 220/240/1ph/50Hz

OVERALL DIMENSIONS

• Length (4M): 5.70m

• Width: 0.71m

• Height: 2.0m

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.