ZMP1110 Pneumatic and Electro-Pneumatic Bench Didactic Equipment Electro Pneumatic Workbench

Pneumatic and electro-pneumatic bench Double-sided mobile workstation allows the assembly and operation of the various components without the use of tools (components equipped with quick assembly system)

- 1* Rolling table dimension between length 1200 mm, height 1700 mm and depth 800 mm minimum.

- 1* extruded and adonized aluminum plate of dimension between 1080 mm length and 680 mm depth minimum with the possibility of fixing the electrical components on both sides.

- 2* cabinet with a minimum of four drawers and locks

- 1* cable guide

- 1 x power supply unit for mounting frame 220V AC- 24 VDC/ 4A minimum with minimum 6 outputs

- 1 x silent lubricated compressor for classroom use: protected by pressure switch and safety valve

- Supply voltage 230V/50HZ

- Operating pressure 7 bar minimum

- Suction flow rate 40 L/MIN minimum

- Tank volume 9 L minimum

- Outlet with pressure regulator, pressure gauge and quick coupler

Pre-actuator for manual and mechanical pressurization

- 2 push-button operated 3/2 NC spool valves

- 2 Push-button operated 3/2 NO dispensers

- 1 3/2 NC valve operated by emergency stop button

- 4 Distributors FC 3/2 NC roller-operated

- 2 NC 3/2 directional control valves operated by retractable roller

- 1 Switch operated 3/2 NC bistable valve

- 1 Push button operated 5/2 directional control valve

- 1 5/2-way valve with two-position selector switch

- 1 Closed center 5/3 valve operated by hook-in lever

Pneumatically operated pre-actuator

- 1 Pneumatically operated 3/2 NC monostable spool valve, 3/2 NC.

- 2 Pneumatically operated 5/2 monostable spool valves

- 2 Pneumatically operated 5/2 bistable valves

Signal processing, flow control and blocking

- 1 logic gate "OR".

- 1 "OR" circuit selector switch

- 1 "AND" logic gate

- 1 "AND" circuit selector switch

- 2 unidirectional flow throttles

- 1 Quick exhaust valve

- 1 Adjustable pneumatic timer with positive output

- 2 Flow regulators with pilot operated check valve

- 1 bi-directional flow restrictor

- 1 Sequence valve

Cylinders

- 2 Single-acting spring return cylinders

- 1 Double-acting cylinder with magnetic piston and elastic damping

- Double acting magnetic piston cylinder with adjustable pneumatic damping

Electro dispensers

- 1 Solenoid valve, 3/2-way monostable NC (24 VDC coil with LED indicator)

- 1 Solenoid valve, 3/2 bistable (24 VDC coil with LED indicator)

- 2 Solenoid valves, 5/2 bistable (24 VDC coil with LED indicator)

- 2 Solenoid valves, 5/2 monostable (24 VDC coil with LED indicator)

- 1 Solenoid valve, 5/3 closed center (24 VDC coil with LED indicator)

- 1 Vacuum generator by suction effect with suction cup

- Control modules/sensors

- 1 ON/OFF switch

- 1 Emergency stop push button (electric)

- 1 Set of electrical inputs (Box with 3 NO-NC pushbuttons)

- 1 Set of 3 relays (3 NO-3 NC, 24VDC coil)

- 1 Indicator (Indicators, ringer)

- 1 Set of 2 timer relays (2 NO- 2 NC)

- 1 Electrical connection terminal block

- 4 Magnetic detectors type Reed

- 2 Static magnetic detectors

- 1 Inductive sensor

- 1 Capacitive sensor

- 1 Photoelectric detector

- 4 Electric limit switch

- 1 Electrical contact pressure switch

- Accessories

- Set of 10 "T" Connectors Ø 4mm

- Set of 10 plastic caps Ø 4mm

- Set of 10 "Y" connectors Ø 4mm

- 1x 4 mm safety laboratory cable set (color red and blue) consisting of at least 80 cables

- all pneumatic components must be equipped with Ø 4mm quick couplings

Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time.

Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.