ZM8137B Flocculation Test Unit Vocational Training Equipment Hydrodynamics Experiment Apparatus

Description

It demonstrates the removal of dissolved substances by precipitation and flocculation with subsequent sedimentation.First, raw water is produced in a tank to contain dissolved metal (e.g. iron). A pump transports the raw water to the precipitation tank. Here the precipitant is added (e.g. caustic soda). Due to the reaction of the dissolved metal ions with the precipitant, insoluble metal hydroxides form (solids). From here the water flows into a flocculation tank divided into three chambers.

The purpose of flocculation is to improve the sedimentation properties of the solids. By adding a coagulant in the first chamber the repulsive forces between the solid particles are cancelled out. The solid particles aggregate into flocs (coagulation). To generate larger flocs, a flocculant is then added (flocculation). In the third chamber low flow velocities are present to prevent any turbulence. Turbulence would impede the formation of flocs. The now well sedimentable flocs are then separated from the treated water in a lamella separator. The treated water and the sedimented flocs (sludge) are collected in two tanks.

Flow rate, temperature and the pH value are measured. In addition, the pH value in the precipitation tank can be controlled. For measuring the conductivity an external meter is available. Samples can be taken at all relevant points. The cover of the tank is transparent for the inspection of the treated water.Analysis technology is required to analyse the experiments. The choice of analysis technology depends on the substances used. Trivalent metallic salts are usually well suited as coagulants. Common flocculants are organic polymers.

Specification

• precipitation and flocculation of dissolved substances (e.g. iron)
• separate supply unit with tank and pump for raw water
• tank cover for raw water and treated water made of transparent material
• precipitation tank with stirring machine
• flocculation tank with 3 chambers and 4 stirring machines
• 3 metering pumps for chemicals
• sedimentation of the flocs in the lamella separator
• measurement of flow rate, temperature and pH value
• control of the pH value in the precipitation tank
• conductivity meter

Technical data

Tanks

raw water and treated water: each 300L

precipitation tank: 10L

flocculation tank: 45L

sludge tank: 15L

Lamella separator

number of lamellas: 6

angle of inclination of lamellas: 60°

Raw water pump

max. flow rate: 180L/h

max. head: 10m

Metering pumps

max. flow rate: each 2,1L/h

max. head: each 160m

Stirring machines

max speed: each 600min-1

Measuring ranges

flow rate: 15…160L/h

pH value: 0…14

temperature: 0…60°C

conductivity: 0…2000µS/cm

230V, 50Hz, 1 phase

230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase

UL/CSA optional

Dimensions and weight

LxWxH: 1550x790x1150mm (supply unit)

LxWxH: 3100x790x1950mm (trainer)

Total weight: approx. 435kg

Required for operation

water connection, drain, iron(III) chloride,

iron(III) sulfate, flocculant, caustic soda, hydrochloric acid

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.

We supply 3 years warranty time.

Packaging & Delivery

Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.