SR-AF302 Supersonic Wind Tunnel Didactic Equipment Fluids Engineering Training Equipment

I. Description

A suction-type continuous-operation supersonic wind tunnel for investigations into subsonic and supersonic air flow. It also allows students to study air flow in two dimensions around aerodynamic models. An instrument frame (supplied) holds a remote-control unit that controls a high-capacity vacuum pump (supplied). The pump creates low pressure downstream of the working section to draw air into the wind tunnel. A bypass duct, with a hand-operated valve, allows the operator to reduce the air flow through the working section, without disturbing the quality of the main air flow. This is useful for startup and shutdown and for subsonic tests. The working section of the wind tunnel is a convergent divergent nozzle with a removable top part (‘liner’). The shape of the liner controls the maximum air velocity at the

divergent part of the working section. Included are three different shaped liners.

A selection of models are included with the equipment (one has pressure tappings) for experiments in twodimensional flow. These fit in the ‘portal’ of the working section, flush to both windows. A geared mechanism allows students to adjust the incidence angle of the models. An encoder works with the optional VDAS to measure the model angle.

Pressure tappings along the working section connect to a ‘mimic’ panel and multi-pressure display unit in the instrument frame. The display unit shows the pressures at the tappings. The display includes calibrated pressure sensors to measure pressures relative to atmosphere. It also shows the pressures on one of the models. An analogue pressure gauge measures and displays the suction of the pump (tunnel reference pressure). This pressure line also connects to the multi-pressure display for data acquisition.

The equipment works with our optional Versatile Data Acquisition System (VDAS®) and can quickly and conveniently connect to a frame-mounting interface unit (VDAS-F, not included). Using VDAS® enables accurate real-time data capture, monitoring, display, calculation and charting of all relevant parameters on a suitable computer (computer not included).The wind tunnel includes transparent windows in the working section. These are high-quality optical glass suitable for use with the optional Schlieren Apparatus (AF302a, available separately) enabling display and recording of images of high-speed flow.

II. Specification

We are committed to a programme of continuous improvement; hence we reserve the right to alter the design and product specifi cation without prior notice. Vacuum pump dimensions and weight (including hood):

Nett (assembled): 1800 mm x 1800 mm x 1500 mm plus a silencer of approximate height 2600 mm; 1750 kg

Packed: 7.44 m3 and 1970 kg

Wind tunnel dimensions and weight:

Nett (assembled): 4000 mm long x 900 mm wide x 1600 mm high; 209 kg

Packed: Approximately 6.5 m3; 250 kg

Working Section

Full section: 25.4mm wide, 101.6mm high and 647mm long

Viewing window: 106.1mm high and 106.1mm wide

Air speeds:

Interchangeable liners are provided to give nominal

working section airspeeds of:

• Mach 1.8

• Mach 1.4

• Subsonic

Models (included):

• 5-degree single wedge

• 7-degree double wedge

• 10-degree double wedge

• 10-degree double wedge with two pressure tappings.

Models adjustment:

Nominally ± 10 degrees

Instruments:

• Angle encoder input board for VDAS-F

• Angle encoder

• 32-way pressure display

• Pressure mimic module

• Delivery pressure – mechanical gauge and electronic transducer

• Supply pressure – mechanical gauge

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.

We supply 3 years warranty time.

Packaging & Delivery

Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.