SM150.01 Fluid Friction Apparatus Didactic Equipment Hydrology Demonstrators

I. Description

During flow through pipes, pressure losses occur due to internal friction and friction between the fluid and the wall. When calculating pressure losses, we need to know the friction factor, a dimensionless number. The friction factor is determined with the aid of the Reynolds number, which describes the ratio of inertia forces to friction forces.

SM 150.01 enables the study of the relationship between pressure loss due to fluid friction and velocity in the pipe flow. Additionally, the pipe friction factor is determined.

The experimental unit includes a small diameter pipe section in which the laminar and turbulent flow is generated. The Reynolds number and the pipe friction factor are determined from the flow rate and pressure loss. In turbulent flow, the pipe is supplied directly from the water supply. The constant pressure at the water supply required for laminar flow is provided by a standpipe on the overflow. Valves can be used to adjust the flow rate.

The pressures in laminar flow are measured with twin tube manometers. In turbulent flow, the pressure is read on a dial-gauge manometer.

The experimental unit is positioned easily and securely on the work surface of the HM 150 base module. The water is supplied and the flow rate measured by SM 150. Alternatively, the experimental unit can be operated by the laboratory supply.

II. Specification

1. investigation of the pipe friction in laminar or turbulent flow

2. transparent tank with overflow ensures constant water inlet pressure in the pipe section for experiments with laminar flow

3. flow rate adjustment via valves

4. twin tube manometers for measurements in laminar flow

5. dial-gauge manometer for measurements in turbulent flow

6. flow rate determined by SM 150 base module

7. water supply using SM 150 base module or via laboratory supply

III. Technical data

Pipe section

§ length: 400mm

§ Ø, inner: 3mm

Tank: approx. 2L

Measuring ranges

§ differential pressure:

§ 2x 370mmWC

§ 1x 0…0,25bar

Dimensions and weight

LxWxH: 850x680x930mm

Weight: approx. 23kg

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.

We supply 3 years warranty time.

Packaging & Delivery

Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Training Room Photo

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today´s and tomorrow´s careers.

Photo for Clients Visiting Factory

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate
Our products takes ISO9001 product management system.