PLC Control Omron Relay Module 1 CO ( SPDT ) / 2 CO ( DPDT ) Output Contacts

In the development of automatic control circuits, there are usually many types of loads, there are alternating currents, there are high voltages and low pressures, and there are frequent infrequent ones. There are NPNs with PNPs.

First explain the PLC amplifier board input selection, the world's PLC regardless of thousands of tens of thousands of brand PLC, his output is only two kinds, one is NPN, load out, one is PNP positive output, relay amplification Board, thyristor amplifier board, transistor amplifier board input are common for NPN and PNP. The best choice for controlling DC load is to use a transistor amplifier board, which is the on-off control of the DC non-contact control load. The response speed is relatively fast, and it is very suitable for DC control applications where the operating frequency is high. The input of the transistor amplifier board is common to both NPN and PNP. The output is divided into NPN and PNP

It is best to use the thyristor amplifying board to control the AC load, that is, the non-contact control load of the DC control AC is on and off, the response speed is relatively fast, and it is very suitable for AC control occasions with high operating frequency, and the voltage range is wide.

There is also a relay amplifier board, also known as a relay module, which is designed to have one or more electronic relays on a circuit board instead of an intermediate relay. This is a space-saving method and is used in occasions where movements are not so frequent and independent. Type and common point type, load voltage is not the same, the choice of independent type with the traditional use of the intermediate relay is exactly the same, if the load voltage is all one, then use the common point type, so that you can take less public line, the provincial line Connection method, wiring can save a lot of time

Features:

• Standard DIN rail mounted
• Status indicarion for each input
• Special circuit for self anti-interference
• Isolation for each relay channel
• With relay base,easy to replace

Application:

• Micro-controller
• PLC control
• Servo systems
• Electro-magnetic valve
• DC motors
• CNC machine
• Home intellogent control

Order information:

• Basic Model
• I/O points:1,2,4,6,8.12.16
• Relay brand:L-OMRON,F-HOHGFA,Q-IDEC,W-Weldmuller,P-Panasonic
• Output contacts:1-1CO(SPDT),2-2CO(DPDT0
• Input voltage:DC5V,DC12V,DC24V,AC110V,AC220V