380VAC Digital Current Monitoring Relay , Phase Balance Relay 2 C/O Output Contacts

The role of the motor protector is to give the motor a complete protection and control. In the motor there are overcurrent, undercurrent, phase failure, stall, short circuit, overvoltage, undervoltage, leakage, three-phase imbalance, overheating, grounding, bearing wear, When the stator and rotor are eccentric, the aging of the winding can be alarmed or protected.

Electronic motor protectors have been developed from transistors to integrated circuits. Microprocessor chips have been developed into thick-mode circuits and are generally classified into phase-failure protection, comprehensive protection (multi-function protection), temperature protection, and intelligent protection. Such protectors have the advantages of energy saving, sensitive operation, high precision, shock and vibration resistance, good repeatability, complete protection functions, and low power consumption.

1 . The motor protector (motor protector) is based on the principle of detecting the change of the line current (including taking, positive sequence, negative sequence, zero sequence and overcurrent), and can detect phase failure or overload signal. In addition to the phase-failure protection function, it also has an overload and stall protection function.
2 . Intelligent protection: The motor protection device integrates protection, telemetry, communication, and remote control to protect the motor from phase failure, overload, short circuit, undervoltage, overvoltage, and leakage, and it also has current and voltage display. Control, software self-diagnosis, call self-recovery, self-start sequence, fault memory, self-trim and remote alarm, flashing alarm before and after current and voltage faults during fault display, RS485 communication interface configuration, and computer networking. At the same time, it can monitor and monitor the functions of 256 motors.

♦ Features
-- Integrative structure or Separate structure
-- Built-in LED and keypad afford a precise,digital setting
-- Three-phase monitoring of short-circuit, locked-rotor,overcurrent, undervurrent, phase loss, phase unbalance,overvoltage,undervoltage
-- Earth fault (should couple with ZCT)
-- Fault recording
-- RS-485 communication port (optional)
-- 4-20 mA analog output (optional) unbalance,overvoltage,undervoltage
-- 2 C/O output contacts, one for trip,one for alert

♦ Protective Functions
-- Short-circuit -- Locked-rotor -- Overcurrent -- Undercurrent
-- Phase loss -- Phase unbalance -- Overvoltage -- Undervoltage
-- Ground fault

♦ Typical Applications
• Pumps • Fans • Blowers • Motors • Compressors

♦ Technical data