Single phase overvoltage relay SVR1000 Digital undervoltage protector
The Features of SVR10000
-- Powered by the measuring circuit
-- Built-in LCD and keypad afford a precise,digital setting
-- Compact modular 43mm housing
-- Adjustable over- and undervoltage threshold
-- Independent adjustable delay time for overvoltage, undervoltage
-- 1 CO & 1NC contacts
-- Fault recording with last 3 faults
♦ Protective Functions
-- Overvoltage
-- Undervoltage
♦ Typical Applications
• Pumps • Fans
• Blowers • Motors
• Compressors
♦ Approvals
• CE • CCC
♦ Technical data
Model | SVR1000/D12 | SVR1000/AD48 | SVR1000/AD220 | ||
Measuring circuit | A1+,A2- | ||||
Rated voltage | DC 12V | AC/DC 24~48V,50/60Hz | AC/DC | ||
Monitoring functions | overvolatege, undervoltage | ||||
Overvoltage setting range | DC | AC/DC 20.0~80.0V adjustable | AC/DC | ||
Undervoltage setting range | DC | AC/DC 20.0~80.0V adjustable | AC/DC | ||
Voltage hysteresis | 0.1~6.0V adjustable | 0.1~30.0V adjustable | 1.0~90.0V adjustable | ||
Delay time for overvoltage | 0.1-999s adjustable | ||||
Reset mode | Manual/ Automatic/Automatic with power-on delay | ||||
Delay time for reset | 0.1-999s adjustable | ||||
Indicators | LCD indicating voltage,operationand fault status | ||||
Output contacts | 1 CO & 1NC | ||||
Contact capacity | 6A ,250VAC | ||||
Dimensions (H x W x D) | 80×43×54mm | ||||
Mounting | DIN rail |
The control circuit uses a high-speed micro-low-power processor as the core, a magnetic holding relay as the main circuit, and a modular standard design. In the process of use, when the voltage of the power supply line is too high or the voltage is too low, our protection The device can cut off the corresponding circuit very quickly under the high-voltage impact for a long time, and also safely cut off the corresponding circuit, so that abnormal voltage is not sent into the following terminal electrical appliances, thereby causing an accident and preventing the occurrence of disasters. When the normal value is restored, the protector will automatically turn on the circuit within the specified time to ensure that the terminal is running in an unattended condition.