VSOL V2808PD-ZG GPON PoE ONT 8FE With Reverse PoE Layer 2 Ethernet Switch
Introduction
V2808PD-ZG(1*GPON+8FE(PD POE)) ONT is designed for fulfilling FTTH request of telecom operators, internet access of SOHO. This product is support GPON model, which has high performance, and the technology of layer 2 Ethernet switch as well. It is highly reliable and easy to maintain, with guaranteed QoS. Its GPON model is fully compliant to ITU-TG.984.x.
Key Features
Interface Parameter
PON | •1GPON port(GPON Class B+) •SC single mode, SC/UPC connector •TX optical power: 0~+4dBm •RX sensitivity: -27dBm •Overload optical power: -8dBm •Transmission distance: 20KM •Wavelength: TX 1310nm, RX1490nm |
LAN | 8 x 10/100Mbps Auto-negotiation RJ45 ports |
Function Data
Basic | •Support MPCP discover®ister •Support authentication Mac/Loid/Mac+Loid •Support Triple Churning •Support DBA bandwidth •Support auto-detecting, auto-configuration, and auto firmware upgrade •Support authentication SN/Psw/Loid/Loid+Psw |
Alarm | •Support Dying Gasp •Support Port Loop Detect •Support Eth Port Los |
LAN | •Support Port rate limiting •Support Loop detection •Support Flow control •Support Storm control |
VLAN | •Support VLAN tag mode •Support VLAN transparent mode •Support VLAN trunk mode(max 8 vlans) •Support VLAN 1:1 translation mode(max 8 vlans) •Auto VLAN detection |
Multicast | •Support IGMPv1/v2,IGMP Snooping •Max Multicast vlan 8 •Max Multicast Group 64 |
QoS | Support 4 queues,SP and WRR and IEEE802.1p |
L3 | •Support IPv4,DHCP/PPPOE/Static IP and NAT •Support Static route |
Application