V-SOL GPON ONT 1xPON+4GE+1USB+WIFI5 Dual Band Ftth Modem ONT V2804DAC
Product Description
V2804DAC ONT 4GE+WiFi5+USB3.0 GPON/EPON ONT WiFi Mesh terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators.
V2804DAC is based on the Realtek chipset technology, which have high ratio of performance to price, and the technology of WiFi5(Dual band), Layer 2/3, and WiFi EasyMesh as well. V2804DAC supports full management of ONT terminals through V-SOL OLTs. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah, ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.
Application
Panel Lights
LED | ON | Blink | OFF |
PWR | The device is powered up | N/A | The device is powered down |
PON | Green is registered to the PON system
| Green is registering to the PON system | Device is not registered to the PON system
|
LOS | Device does not receive optical signals
| N/A | Device have received optical signals
|
LAN1~LAN4 | Port is connected properly | Port is Sending/Receiving Data | The subscriber network cable is not plugged tightly or the port connection is incorrect or no connection.
|
WiFi (2.4G/5Ghz) | WiFi Turn On | WiFi Turn On with ongoing data transmission | Devide is Power Off or WiFi Turn Off |
USB | USB device is connected | Ongoing data transmission | USB device isn’t connected |
Port Type | Function |
PON | Connect PON port with internet by SC/UPC type, single mode optical fiber cable. |
LAN 1/2/3/4 | Connect device with ethernet port by RJ-45 cat5 cable. |
RST Button | Press down reset button and keep about 5seconds to make the device restart and recover from the factory default settings. |
Pair Button | Press down WLAN Pair button to begin pairing. |
WIFI Button | WLAN on/off. |
DC12V | Connect with power adapter. |