Dual Mode ONU 2x FXS Telephone Port Wifi Router Voip Router gpon hGU
Product Description
G/EPON 1GE+4GE+2POTS+WiFi+USB ONU meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home) broadband speed, SOHO broadband access, video surveillance and other requirements and design a GPON/EPON Gigabit Ethernet products. The box is based on the mature Gigabit GPON/EPON technology, highly reliable and easy to maintain, with guaranteed QOS for different service. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
GPON/EPON 4GE+2POTS+WiFi+USB ONU
Application
Specifications
LED | Mark | Status | Description |
Power | PWR | On | The device is powered up. |
Off | The device is powered down. | ||
Registration | PON | On | The device is registered to the GPON system. |
Off | Device is not registered to the GPON system. | ||
Blink | Device is registering. | ||
Optical signal | LOS | Blink | Device does not receive optical signals. |
Off | Device has received optical signals. | ||
WAN | WAN | On | WAN is effective. |
Off | WAN is ineffective. | ||
Wireless | WiFi | On | WiFi turned on. |
Off | Device is power off or WiFi turned off. | ||
Blink | WiFi turn on and with ongoing data transmission. | ||
Pots | FXS1 FXS2 | On | Device has registered to the soft-switch, but without ongoing data transmission. |
Off | Device is power off or not registered to the soft-switch. | ||
Blink | Phone hooks off or the port is with ongoing data transmission. | ||
Ethernet | ETH1 iTV ETH3 ETH4 | On | Port is connected properly. |
Off | Port connection exception or not connected. | ||
Blink | Port is sending or/and receiving data. | ||
Pair | WPS | On | WPS client is connected. ( LED turn off after 5 minutes of successful connection) |
Off | Does not use WPS or WPS client is connected.( LED turn off after 5 minutes of successful connection) | ||
Blink | WPS client is connecting. | ||
USB | USB | On | USB device is connected, but without ongoing data transmission. |
Off | Device is power off or USB device is not connected. | ||
Blink | USB is with ongoing data transmission. |