45 pinpoint zones walk through metal detector with battery backup for embassy security check PG888

Many of our customers need a walk through metal detectors but they don't know how to solve the problem of power as the site is very far and no electricity time by time.

Here we make a battery backup system for our 45zone metal detectors PG888.

When there is electricity, the gate will charge the battery automatically. the protective PCBs of the battery will prevent from overcharge and protect the battery.

When no power, we can use the battery backup system to support the walk through metal detector for more than 8hours. ( larger volume is available. )

What's more , we add a power saving system to the metal detector gates.

When there is no action for about 15minutes, the gate will enter sleep status. the screen will be off .
if anybody passing through the metal detection system, it will be activated at once.

we are doing our best to save power and more efficient.

Features

• Multidimensional coil design (45 distinct pinpoint zones) provides superior detection and location of guns, knives and other flat and rod-shaped weapons regardless of orientation.
• Circuitry with advanced Digital Signal Processor (DSP) technology locates even small, hard-to-find, floor level weapons.
• Individual zone boost adjustments allow for customization of detection characteristics and/or compensation for metallic environmental challenges.
• Superior target detection with unmatched discrimination of harmless items such as coins, jewelry, keys, cigarette packs, etc.
• The ultimate in safety, throughput and reliability with preset programs to cover the most complete range of security applications including the new Enhanced Metal Detector (EMD) required for all airport installations.
• Can be connected to the PC for the communication .
• With REMOTE Control
• Optional interface for the CCTV, Monitor

Specifications:

• Operating Temperatures
  -4°F (-20°C) to + 158°F (70°C); Humidity: To 95% non-condensing
• Power
  Fully automatic 220 to 240 VAC, 50 Hertz, 15 watts; no rewiring, switching or adjustments required. Power supply meets UL, CE,FCC standards.
• Tamper-Proof
• All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.
• Construction
  Attractive scratch and mar-resistant laminate. Detection Heads and Support: Heavy duty aluminum.
• Control Outputs
  Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
• Traffic Counter
  Counter tracks the number of patrons that have passed through the detector, the number of alarms and calculates alarm percentage.
• Synchronization
  Dual channels and DSP circuitry allow several PG888's to operate simultaneously in close proximity to one another.
• Interference Suppression
  Special DSP built-in circuitry eliminates effects from x-ray monitors and other potential electrical interference sources.
• Alarms
  Audible tone and volume adjustable. Bright LED visual alarm.
• Target Pinpointing Lights
  45 distinct zones are displayed with 2 independent columns of LED's located on exit side of PG888.
• Pacing Lights
  International symbols (Green light is ready, Red light is Wait)
• Warranty
  Limited 24 months