80-140kv Voltage Generator X-Ray Introscope Television Inspection System For Security
The security screening unit(X-ray television installation Inspector) is used at airports, train stations, and other places with a large crowd of people, where there may be a danger of a terrorist attack. Modern X-ray inspection equipment displays a double image, which allows you to get a more accurate picture of the contents of the scanned item. In this case, it does not matter in what position the object under investigation is located, since the inspection X-ray installation scans it from all sides at once.
When using stationary screening X-ray systems, it is not necessary to change the position of the object, therefore the check does not take much time, and the throughput during the screening increases.
The X-ray inspection complex is equipped with a movable console and a remote control panel. All information about the check is displayed on the monitor, which is always in front of the operator's eyes. The structure can be moved from place to place, and it can be folded to pass through narrow openings.
X-Ray Introscope Television Inspection System Specifications:
General Specification | |
Tunnel Size | 500(W)*300(H)mm |
Conveyor Speed | 0.22m/s |
Conveyor Max Load | 150kg |
Dose per Inspection | <1.4Gy/h |
Resolution | 34AWG to 40AWG |
Spatial resolution Level | dia1.0mm |
Vertical | dia1.0mm |
Penetrate resolution | 24WG to 34AWG |
Penetration | 30mm to 40mm Steel |
Film Safety | Guarantee ISO1600 Film |
X-ray Leakage | <0.1 μGy/h (at a distance of 5cm From external housing) |
X-ray Generator | |
Generate direct | Upward |
Generate anger | 80 degree |
Anode Voltage | 80Kv |
Anode power | 0.4 to 1.2mA |
Cooling / Duty Cycle | Oil Cooling /100% |