3 AXIS 5000 * 3000 mm big table water jet cutting machine with 420 mpa intensifier pump water jet cutter

Quik details of water jet cutter:

1. 3 AXIS 5000 * 3000 mm

2. big table water jet cutting machine

3. 420 mpa intensifier pump

The advantages of water cutting and the improvement of its efficiency:

Waterjet processing also plays an important role in the grinding and maintenance of industrial steel, especially the double-headed waterjet, which is unmatched by ordinary grinding equipment. In the grinding and maintenance process, the slicer device does not need to be replaced at all, and different types of materials and shapes can be processed with one nozzle, saving cost and time.

The key is that abrasive sand is used for waterjet processing, and the cut burr obtained is less, which greatly improves the processing quality. And with the application of technology, the automatic operation of the water jet is realized, and the loss of the workpiece can be reduced as much as possible by only generating the corresponding degree according to the CAD drawing software.

In addition, waterjet cutting can produce any geometric figures, the cutting size is accurate, and beautiful, and the cut is frosted. The whole cutting process will not generate heat, and there will be no defects such as scratches at the cutting seam. Workpieces processed by water jets can be used directly without reprocessing.

In addition to cutting, water jets are also ideal equipment for punching. Various processing can be completed simply and quickly without the cooperation of molds and clamping tools. Because water cutting is non-contact cutting, there will be no material breakage.

The work efficiency of waterjet processing will be affected by many factors, one of which is the amount of water on the cutting platform. That is to say, sometimes as long as the amount of water on the cutting platform is reasonably controlled, it can prevent the raw materials from overheating or caused by the lack of water. The problem of uneven cutting helps to improve work efficiency.

Compared Water jet cutter with other cutting methods:

1. Water jet cutter compared with and laser cutting:

The investment in laser cutting equipment is relatively large. Currently, it is mostly used for cutting thin steel plates and some non-metallic materials. The cutting speed is faster and the accuracy is higher. However, the laser cutting will cause arc marks and heat effects at the kerf; It is not ambition for laser cutting of some materials, such as aluminum, copper and other non-ferrous metals and alloys, especially for the cutting of thicker metal plates. The cutting surface is not ideal, or even impossible to cut. At present, people's research on high-power laser generators is trying to solve the cutting of thick steel plates, but the cost of equipment investment, maintenance and operation consumption is also very high. Waterjet cutting has low investment, low operating cost, wide range of cutting materials, high efficiency, and convenient operation and maintenance.

2. Compared with water cutting and plasma cutting:

Plasma cutting has obvious thermal effect, low precision, and it is not easy to perform secondary processing on the outside of the cutting. Water cutting is a cold cutting, no thermal deformation, good quality of the cutting surface, no secondary processing is required, and it is easier to perform secondary processing if necessary.

3. Compared with water cutting and wire cutting:

For metal processing, wire cutting has higher precision, but the speed is very slow. Sometimes other methods are needed to punch and thread to cut, and the cutting size is greatly limited. Water cutting can perforate and cut any material. The cutting speed is fast and the processing size is flexible.

4. Compared with other cutting methods: 　

For some metal parts, the punching and shearing process can be adopted, which has high efficiency and fast speed, but requires specific molds and tools. Compared with this cutting method, water cutting is more flexible and can be cut at any time for workpieces of any shape, especially when the material is thick. , In the case of high hardness, the punching and shearing process will be difficult or impossible to complete, and the method of water cutting machine is more suitable; flame cutting is also a commonly used cutting process in the metal field, and the cutting thickness range is very large, but compared with water cutting The thermal effect is obvious, and the cutting surface quality and accuracy are poor. In addition, water cutting can well solve the cutting processing of some special materials such as high melting point, alloys, and composite materials.

In the cutting and processing industries of glass, stone, ceramics, etc., the traditional method is to use diamond cutters for cutting, sawing, milling, etc. The cutting thickness range is very large and the speed is relatively fast, but for conventional thickness plates, water cutting can stop high precision The cutting process of any curve, the yield rate is high, the cutting cost is reduced, and the added value of the processed product is greatly improved.

Can be customized to any size, mini platform or ultra-large platform or other size can be customized.

Cutting samples of our water jet cutter :

Customer Service:

We have exported to more than 20 countries yet, and now have agent in America, Russia,South Africa,Ecuador,UK,Argentina,Chile,Mexico,Austrilia,Saudi Arabia and other GCC countries, Malaysia,Vietnam. we can arrange engineers go to customer's factory if no agents in their country.