Save your cutting cost 3 AXIS 5000 * 3000 mm water jet cutting machine with 6000 psi direct drive pump water jet cutter

Specification for our water jet cutter :

Specification for direct drive pump of our water jet cutter:

We have 420Mpa intensifier pump, 600Mpa intensifier pump ,direct drive pump and 420mpa with dual intensifier pump, we also can provide 3 axis , 5 axis with 10 degree and dynamic 5 axis with 60 degree cutting head water jet cutting machine, pure water cutting and abrasive sand cutting. our machines are with excellent quality - efficient and accuracy, economical investment with low initial cost and low maintenance cost to our customers. All the machinery delivered by us come with first class after-sale service. all machines are with one-year warranty of main parts, whole-life after-service for the entire machine.Our new FLOW type cutting head can improve you 10% cutting efficiency, and our new technology can make the machine moving speed to 30-50m/min so that reduce you 15%-50% cutting cost according to the materials.

Comparison of waterjet with traditional cutting methods:

Ultra-high pressure water cutting technology has become the world's most rapidly developing machine tool technology for its highly praised power, speed and versatility.

Manufacturers have achieved higher efficiency and stronger production capacity after applying ultra-high pressure water cutting to their production. Nowadays, waterjet cutting can quickly and accurately cut all kinds of materials from food and paper to composite materials, steel and even rare metals.

With waterjet technology, you can feel:

1. Stronger cutting ability

Easily cut almost any material to meet various applications.

The cold working method has no thermal effect and no mechanical deformation.

With just one step, materials with thickness from 1/16in (1mm) to 8in (200mm) can be cut into any shape.

The pure water jet can quickly cut various soft materials, such as rubber, cork, foam, etc.

It only takes less than two minutes to switch from pure water jet mode to sand water jet mode.

The abrasive waterjet can cut various hard materials, such as metal, stone, plastic, composite material, glass and stone, etc., and the cutting edge quality is good.

2. Reduce material and production costs

Very few fixtures and machining requirements.

The cutting is precise and the edges are neat, which can meet the requirements of tight typesetting. Reduce the production of waste while increasing profits and productivity.

3. Green technology, complementary technology

Waterjet can be used as other cutting methods in production, such as complementary technologies of wire cutting, laser, milling and plasma.

Although each workshop has its own unique cutting process requirements, most of them will find that the water jet has not only increased their production capacity, but also increased their profits.

Waterjet cutting is free of dust, toxic gases and other gas impurities, and will not produce any toxic substances.

4. Milling

If you want to cut the periphery of the workpiece and punch holes, instead of using blind holes, drilling and threading methods, it is better to choose a faster, easier to arrange and cheaper water jet. The main reason is that we only need one water cutting process to complete the cutting of the workpiece, without having to grind all the metal into pieces. When it is necessary to cut high-precision workpieces, the water jet is a machine tool that can be used to produce close to the finished product, which can be processed at one time without heat effect. In addition, the waste produced by the water jet is usually more valuable because it is in the form of a whole piece instead of scraps and can be reused.

5 Wire EDM

For metal processing, wire cutting has higher precision, but the speed is very slow. Sometimes other methods are needed to perforate and thread to cut, and the cutting size is greatly limited. Water cutting can perforate and cut any material. , The cutting speed is fast and the processing size is flexible.

6. Laser

The investment of laser cutting equipment is relatively large. At present, it is mostly used for the cutting of thin steel plates and some non-metallic materials. The cutting speed is faster and the accuracy is higher. However, there are arc marks at the slit during laser cutting and cause thermal effects; Laser cutting is not ideal, such as aluminum, copper and other non-ferrous metals and alloys, especially for the cutting of thicker metal plates, the cutting surface is not ideal, or even impossible to cut. At present, people's research on high-power laser generators is trying to solve the cutting of thick steel plates, but the costs of equipment investment, maintenance and operation consumption are also considerable. Waterjet cutting has low investment, low operating cost, wide range of cutting materials, high efficiency, and convenient operation and maintenance.

7. Plasma cutting

Plasma cutting and flame cutting have obvious thermal effects, low precision, poor surface finish, and it is not easy to perform secondary processing. The width of the processing knife is relatively wasteful, and the thermal effect of cutting is serious. The workpiece is deformed. Water cutting is cold cutting, no thermal deformation, good cutting surface quality, high cutting accuracy, no secondary processing, small knife seams and no waste, and it is also convenient for secondary processing.

8. Punch

If the traditional punching machine wants to work in various materials and thicknesses, it needs to make complex shapes or nested parts, and it takes a long time to program and set up. The rapid programming and setting of the water jet greatly shortens the machining time

After-sales Service:

1. Field maintenance and repair service,

2. Online support, Field installation, commissioning and training, Video technical support

3. Free spare parts.

We have exported to more than 20 countries yet, and now have agent in America, Russia,South Africa,Ecuador,UK,Argentina,Chile,Mexico,Austrilia,Saudi Arabia and other GCC countries, Malaysia,Vietnam. we can arrange engineers go to customer's factory if no agents in their country.