010559-1 for water jet pump parts High pressure intensifier parts check valve body assy Waterjet Pump Parts

010559-1 check valve body assy details:

The importance of check valves:

In order to prevent the backflow of water, when high-pressure water enters the check valve from the waterjet high-pressure cylinder, the check valve will allow the high-pressure water to enter the check valve inlet. When the pressure of the high-pressure cylinder decreases, the check valve inlet is automatically closed. Prevent backflow of high-pressure water. In order to completely isolate the contact of high-pressure water, many sealing parts are used.

A check valve needs to be set in the following situations:

1. Only on the introduction pipe connected directly from the urban water supply pipe.

2. A check valve should be installed on the water inlet pipe of a closed water heater or water equipment. Since the volume of hot water units used in residential buildings is small, the possibility of backflow is small when there is no hot water circulation. Therefore, there is no hot water unit with a water storage volume of not greater than 200L for hot water circulation in the house, and no check is required. valve.

3. When the water tank and water tower have one inlet and outlet pipes, in order to prevent water from entering at the bottom, check valves should be installed on the water outlet pipe section at the bottom. It should be noted that when this check valve enters the water tank (tower), the pressure of the check valve is unstable due to the action of the three-way jet, which will cause the disc (core) to vibrate. Therefore, the check valve should be subjected to vibration isolation treatment .

Our products:

010559-1 for water jet pump parts High pressure intensifier parts check valve body assy Waterjet Pump Parts:

Our company:

Shandong WAMI CNC Technology Co., Ltd. is a manufacturer of industrial cutting ultra-high pressure waterjets. Based on years of machining experience, the company continues to research, improve and improve the current waterjet CNC machine tool technology and process status, so that the waterjet cutting equipment accuracy, efficiency and cutting ability have been better brought into play.We can configure the best solution for users according to customer needs.