Specifications
Brand Name :
Warom
Place of Origin :
China
Payment Terms :
T/T
Packaging Details :
carton packing/wooden box package
Explosive hazardous atmosphere :
Zone 1, Zone 2, Zone 21 and Zone 22
Widely used for :
landing aid signal on helideck of marine engineering oil and gas drilling platforms and ships etc. hazardous area
Can reliably work in :
severe environment where is easily affected by moisture, vibration, or corrosion
Temperature :
-40℃~+55℃
Description
Product Introduction



Specification

◆ Systematically meet CAP 437, ICAO standards;

◆ All the products and accessories installed on the platform of the helicopter platform are suitable for mounting in the range of ambient temperature (-40℃~+55℃);

◆ All explosion proof lamps and exposed fasteners installed on helicopter platforms can resist the corrosion of ocean environment.

◆ All lamps meet at least the requirements of the IEC international protection (IP) standard IP 66, i. e. Dust proof and strong water injection.



Data

HDL-H

Helideck Explosion-proof H Light


II 2 G Ex db eb IIC T6 Gb

II 2 D Ex tb IIIC T80 Db IP66/IP67

◆ Enclosure uses high quality maritime aluminium alloy, which is applied to

the ocean environment.

◆ LED green light source, service life is up to 100000 hours.

◆ Standard light and bright light of light fittings can be switched through

controlling the system and the dimming instruction of light fittings.

◆ Professional optics software designed secondary light distribution system,

conform to CAP437 standard requirements.

◆ Total height is less than 25mm, protection degree is higher to IP66/IP67/IP69.

HDL-C

Helideck Explosion-proof Circle Light

II 2 G Ex db eb IIC T6 Gb

II 2 D Ex tb IIIC T80℃ Db IP66/IP67

◆ Enclosure uses high quality maritime aluminium alloy, which is applied to

the ocean environment.

◆ LED yellow light source, service life is up to 100000 hours.

◆ Standard light and bright light of light fittings can be switched through

controlling the system and the dimming instruction of light fittings.

◆ Professional optics software designed secondary light distribution system,

conform to CAP437 standard requirements.

◆ Total height is less than 25mm, protection degree is higher to IP66/IP67/IP69.

HDL-P

Explosion-proof Perimeter Light

II 2 G Ex db eb IIC T6 Gb

II 2 D Ex tb IIIC T80℃ Db IP66/IP67

◆ Enclosure is precision casting by 316 stainless steel, powder coated

on surface after finish machining, strong corrosion resistance.

◆ LED green light source, service life is up to 100000 hours.

◆ Professional optics software designed secondary light distribution

system, conform to CAP437 standard requirements.

◆ Total height is less than 100mm, protection degree is higher to IP66/IP67.

HDL-F

Helideck Explosion-proof Floodlight

II 2 G Ex db eb mb op is IIC T5 or T4 Gb

II 2 D Ex tb op IIIC T95℃ or T130 Db IP66/IP67

◆ Enclosure uses maritime aluminium alloy, powder coated on surface after

preservative treatment.

◆ LED white light source, service life is up to 100000 hours.

◆ In-built constant voltage constant current driving power, wide voltage input,

constant power output, fast start, stable performance, surge resistance,

overcurrent, open circuit, short circuit, etc. protection function.

◆ Total height is less than 135mm, protection degree is higher to IP66/IP67.

HDL-S

Explosion-proof Status Light

II 2 G Ex db eb mb op is IIC T6Gb

II 2 D Ex tb op is IIIC T80℃ Db IP66

◆ Enclosure uses maritime aluminium alloy, powder coated on surface after

preservative treatment.

◆ Professional optics software designed secondary light distribution system,

conform to CAP437 standard requirements.

◆ Through the control system, status instructions are given to the lamps.

The red LED light source flashes and gives warning signals.

◆ Total height is less than 100mm, protection degree is higher to IP66/IP67.

HDL-W

Explosion-proof Wind Direction Lamp

II 2 G Ex db eb op is IIC T6 Gb

II 2 D Ex tb op is IIIC T80℃ Db IP66


◆ Enclosure uses maritime aluminium alloy, powder coated on surface after

preservative treatment.

◆ Professional optics software designed secondary light distribution system,

conform to CAP437 standard requirements.

◆ Through the control system, status instructions are given to the lamps.

The red LED light source flashes and gives warning signals.

◆ Total height is less than 100mm, protection degree is higher to IP66/IP67.

HRMD91

Explosion-proof Distribution Panels


II 2 G Ex db IIB+H2 T6 Gb

II 2 G Ex tb IIIC T80℃ Db IP66

◆ Copper-free Aluminium Alloy enclosure, powder coated surface.

◆ Equipped with specialized hinge structure, which can prevent the flameproof

joints from damage when opening and closing the box, and greatly prolong

the service life of box.

◆ The boxes can be combined and installed freely to save space and meet the

requirements of various distribution systems.

◆ Special requirements on request.



Download


Helicopter Landing Platform Aid System

(Download here:Explosion Proof Helicopter Landing Platform Aid System CAP 437 ICAO StandardsHelicopter Landing Platform Aid System.pdf)

Contact us for more information:

Address : No. 555, Baoqian Road, Jiading District, Shanghai, China

Zip Code: 201808

Tel: +86 21 39977076 /+86 21 39972657

Fax: +86 21 39977077

E-mail: gmb@warom.com






Send your message to this supplier
Send Now

Explosion Proof Helicopter Landing Platform Aid System CAP 437 ICAO Standards

Ask Latest Price
Brand Name :
Warom
Place of Origin :
China
Payment Terms :
T/T
Packaging Details :
carton packing/wooden box package
Explosive hazardous atmosphere :
Zone 1, Zone 2, Zone 21 and Zone 22
Widely used for :
landing aid signal on helideck of marine engineering oil and gas drilling platforms and ships etc. hazardous area
Contact Supplier
Explosion Proof Helicopter Landing Platform Aid System CAP 437 ICAO Standards

Warom Technology Incorporated Company

Verified Supplier
1 Years
shanghai, shanghai
Since 1987
Business Type :
Manufacturer, Seller
Total Annual :
1000000-2000000
Employee Number :
2000~2300
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement