ABS PP Material Bubble Aeration Big Air Generator Coarse Bubble Diffuser
Technology Parameter
Model | Type | Connector | Design flow | STOE | Service area(m³) |
dn280 | Spiral Mixing Aerator | 3/4 NPT male thread | 3-4m³/h | ≥38%(6m submerged) | 0.4-0.8 |
Size | Material | Bubble size | Flow range | Water-Head loss | Service life |
8 inch | pp+abs | 3-4mm | 1-8m³/h | 2000-4300pa | >5 years |
Product Description
ABS coarse bubble diffuser adopts the form of multi-layer spiral cutting for oxygen aeration. When the air flow enters the aerator, the air flow first enters the multi-layer zigzag air distribution head of the lower layer after cutting through the two-way spiral cutting system, and then carries out multi-layer cutting, so that the air bubble is cut into microbubbles, which greatly improves the utilization rate of oxygen, and has the characteristics of uniform air distribution and high oxygen charging efficiency. It is suitable for biochemical treatment of industrial wastewater, municipal sewage and activated sludge, aeration device of biological contact oxidation process sewage treatment and pre aeration of regulating tank, and widely used in push flow and mixed aeration tanks of biochemical treatment.
Project Project
Product Advantage
1. No blockage, small gas resistance loss;
2. Compared with microporous aerator, there's no concern for the gradual deterioration of efficiency.
3. The coarse bubbles can be kept in uniform operation for a long time.
4. The material is not easy to be aged, the safeguard measures are comprehensive, and don't need to be cleaned, replaced and maintained.