Mbbr Carrier Media Fluidized Bed Packing With Long Service Life

Technology Parameter

Product Description

Fluidized bed packing, also known as MBBR packing, is a new type of bioactive carrier. It adopts scientific formula, according to different water quality requirements, integrates different kinds of Microelements in polymer materials, which are conducive to the rapid growth of microorganisms. After special process modification and construction, it has the advantages of large specific surface area, good hydrophilicity, good fluidity, high biological activity, easy to hang membrane, good treatment effect, long service life and so on.

Characteristics

1. With high-quality copolymers, long-term immersion in waste water will not degrade, nor will it have toxic effects on microorganisms.

2. Special structure, the hollow packing structure has three layers of hollow circles inside and outside, each circle has one edge inside and 36 edges outside. It has been successfully researched and developed for many times and adopts one-time forming.

3. With high specific surface area, the specific surface area of ordinary microorganism is 90-180, the specific surface area of hollow filler can reach 600, and the double specific area can reach more than 860. Because of the high specific surface area, the biomass in unit volume is high, and the purpose of short hydraulic retention time can be achieved.

4. High activity of microorganisms. The biofilm growing on the surface of the packing is due to the fluidization collision of the packing. Aeration scour makes the microorganism in the logarithmic growth period with high activity and high treatment efficiency.

5. Hollow packing is floating type, easy to replace and long service life.

6. The ability of denitrification and decomposition of organic matter is strong, so as to achieve the purpose of removing ammonia nitrogen

Discriminant index

Filler performance

Performance of packing - the most important index to evaluate the biological adhesion of packing

(1) Surface properties of fillers

1. Surface structure: it is generally considered that the surface roughness is large and the film hanging speed is fast.

2. Surface potential: generally, microorganisms are negatively charged, and the surface of filler is positively charged, which is suitable for microbial growth. 3. Hydrophilicity: the microorganism is hydrophilic particle, and the filler has good hydrophilicity and is suitable for microorganism growth.

Film hanging state

(2) Hydraulic properties

1. Porosity: volume occupied by filler, high porosity.

2. Shape and size: affect the flow pattern of water and air flow.