Dn150mm Elastic Filler PP Wire And Polyester Center For Bio-film Carrier
Product Description
HUISEN Elastic Filler is made with special manufacturing processs, which inserts and fixes the PP wires on the corrosion-resistant and high-strength central rope, making the PP wires in a three-dimensional and uniform radiation state. It also uses high quality material, which is resistant to corrosion & high temperature and aging, the additives, such as hydrophilic, adsorption, heat-resistant and oxygen resistant are also mixed. Because of the excellent material selection and technological formula, the elastic fillers' rigidity and softness are moderate.
Product Advantage
High heat dissipation performance and low resistance;
Large specific surface area, good water and air distribution performance;
Fast film hanging, easy film removal, good growth and renewal of biofilm;
High load impact resistance, high removal rate of CODCr, good treatment effect;
Easy installation, just tie the each single elastic filler in the frame.
Product Parameter
Model | Diameter (mm) | Length per m3 (m/m3) | Weight per m3 (kg/m3) | Surface area (m/m3) | PP wire diameter
|
HS-EF-150 | 150 | 44 | 2 | 310 | 0.45 |
HS-EF-180 | 180 | 38 | 1.8 | 265 | 0.45 |
HS-EF-200 | 200 | 25 | 1.7 | 250 | 0.45 |
Product Application
Elastic filler is widely used as biological filler in biological contact oxidation tank and hydrolysis acidification tank, it is suitable for both aerobic tank and anaerobic tank.
Product Package