80*1000mm Fine Bubble Tube Diffuser Silicone Nano Bubble Aeration
Product Description
Huisen 80mm fine bubble tube diffuser is made by three parts, ABS support part, which sometimes can be PVC, EPDM membrane and SS304 clamp.
There are tiny self closing holes on the membrane. During operation, the micropores of the aeration pipe will open automatically under the air pressure, and the air will enter the tank for oxygen charging; if the pressure disappears, the micropores of the aeration pipe will close automatically to prevent water from flowing back into the micropores.
Product Feature
The tube aerator has the characteristics of simple structure, high oxygen utilization rate, reliable performance, non-clogging of stomata, non-reverse irrigation of sewage, uniform circumferential stress, long service life, convenient installation and maintenance, and low system price.
The small bubble diameter of the product can not only maintain a high oxygen conversion rate, but also achieve the function of mixing and stirring.
Product Application
Municipal waste water treatment;
Industrial waste water treatment;
Clean water treatment;
Sludge stabilization;
Wastewater ozone diffusion;
Aeration of fish ponds;
Aeration of streams and lakes;
Technology Parameter
Item | φ65*500mm | φ65*750mm | φ65*1000mm | |
Spec. φ*L mm | 65*500mm | 65*750mm | 65*1000mm | |
Oxygen transfer efficiency | 5m Water Depth | 23-32% | ||
6m Water Depth | 34-39.5% | |||
7m Water Depth | 31-45% | |||
Ventilatory volume (m3/h) | 1.7-6.8 | 3.4-13.6 | 3.4-17 | |
Service area | 0.82-1.26m2 | 0.98-2.11m2 | 0.98-2.35m2 | |
Number of holes | 8080 | 10300 | 13880 | |
Bubble diameter | 0.8-2.0mm | |||
Pressure loss | 25-42cm | 25-41.5cm | 25-40cm | |
Oxygenation capacity | Micropore: 7.5kgO2/kw.h(under 5m of water); Pore:3.5-4.8kgO2/kw.h(under 5m of water) | |||
Tension strength | >13.8*103kpa | |||
Extension ability | >600% |