Dn100mm EPDM Fine Bubble Tube Diffuser For Water Aeration System

Product Description

Huisen 100mm fine bubble tube diffuser is made by three parts, ABS support part, which sometimes can also be PVC, EPDM membrane and SS304 clamp.

There are tiny self closing holes on the membrane. During operation, the micropores of the aeration pipe will open automatically under the air pressure, and the air will enter the tank for oxygen charging; if the pressure disappears, the micropores of the aeration pipe will close automatically to prevent water from flowing back into the micropores.

Product Feature

1. Digital control knife

Membrane has large numbers of self-closing holes with using mechanical punching technology. The holes can automatically open and close when the oxygen operation stopped, so it can avoid blocking holes;When aeration tank stops, sewage mixing will not be poured back, also can reduce maintenance.

2. High opening rate

Membrane is installed conveniently and uniformly arrangement, so that air can arrange the whole membrane evenly, and the opening rate will increase. Thus the aeration capacity and service area will increase, and aeration resistance is reduced when the aerator starts.

3. Environmental material

Use engineering plastics ABS material, simple structure, reliable performance, hollow water filling, greatly reducing the buoyancy of the aeration system in the water.

Product Application

It is applied to domestic sewage and industrial treatment. It is used in different stages of aerobic tank, anoxic tank, sedimentation tank and other sewage treatment processes. It is not limited by the shape of the tank, and can be used in various types of tanks.

Technology Parameter