♦ Exclusive pre-thickening device enables a wide solid concentration ranging from 3000mg/l to 50000mg/l
♦ Fixed and moving plates replace filter cloth, self-cleaning, clog-free, easy to handle oily sludge
♦ Low running speed, low noise, low power consumption, 1 /8 of Belt Press and 1 /20 of centrifuge
♦ Less capital construction cost, more excellent working performance
♦ Fully automatic control, Easy operation and simple maintenance
Technical parameters
Model | DS Standard capacity(kg/h) |
Sludge treatment(m3/h) | ||||||||
10000mg/L | 20000mg/L | 30000mg/L | 40000mg/L | 50000mg/L | ||||||
HLDS131 | 6-10 | 1 | 0.5 | 0.4 | 0.3 | 0.28 | ||||
HLDS132 | 12-20 | 2 | 1 | 0.8 | 0.6 | 0.56 | ||||
HLDS133 | 18-30 | 3 | 1.5 | 1.2 | 0.9 | 0.84 | ||||
HLDS201 | 9-15 | 1.5 | 0.75 | 0.6 | 0.5 | 0.4 | ||||
HLDS202 | 18-30 | 3 | 1.5 | 1.2 | 1 | 0.8 | ||||
HLDS203 | 27-45 | 4.5 | 2.25 | 1.8 | 1.5 | 1.2 | ||||
HLDS301 | 30-50 | 5 | 2.5 | 2 | 1.5 | 1.4 | ||||
HLDS302 | 60-100 | 10 | 5 | 4 | 3 | 2.8 | ||||
HLDS303 | 90-150 | 15 | 7.5 | 6 | 4.5 | 4.2 | ||||
HLDS304 | 120-200 | 20 | 10 | 8 | 6 | 5.6 | ||||
HLDS401 | 90-150 | 13 | 6.5 | 5 | 4 | 3.2 | ||||
HLDS402 | 180-300 | 26 | 13 | 10 | 8 | 6.4 | ||||
HLDS403 | 270-450 | 39 | 19.5 | 15 | 12 | 9.6 | ||||
HLDS404 | 360-600 | 52 | 26 | 20 | 16 | 12.8 |
Model | DN(mm) | Discharge Height(mm) | Dimension(mm) |
N.W(kg) |
O.W(kg) | ||
L | M | H | |||||
HLDS131 | φ130*1 | 250 | 1860 | 740 | 1075 | 250 | 395 |
HLDS132 | φ130*2 | 250 | 1960 | 870 | 1075 | 350 | 595 |
HLDS133 | φ130*3 | 250 | 1960 | 920 | 1075 | 450 | 795 |
HLDS201 | φ200*1 | 350 | 2650 | 750 | 1375 | 420 | 540 |
HLDS202 | φ200*2 | 350 | 2650 | 940 | 1375 | 550 | 660 |
HLDS203 | φ200*3 | 350 | 2650 | 1190 | 1375 | 700 | 1010 |
HLDS301 | φ300*1 | 530 | 3440 | 940 | 1825 | 900 | 1300 |
HLDS302 | φ300*2 | 530 | 3640 | 1260 | 1825 | 1350 | 2000 |
HLDS303 | φ300*3 | 530 | 3900 | 1620 | 1825 | 1900 | 2700 |
HLDS304 | φ300*4 | 530 | 3900 | 2040 | 1825 | 2500 | 3600 |
HLDS401 | φ350*1 | 570 | 4350 | 1020 | 2160 | 2200 | 4200 |
HLDS402 | φ350*2 | 570 | 4350 | 1550 | 2160 | 3500 | 6000 |
HLDS403 | φ350*3 | 570 | 4570 | 2100 | 2160 | 5500 | 8000 |
HLDS404 | φ350*4 | 570 | 4570 | 2650 | 2160 | 7000 | 9500 |
Model | Motor Power | Rinse Water Pressure | Water Consumption(L/H) | Maintennance Frequency | ||
Screw shaft | agitator | total | ||||
HLDS131 | 0.1 | 0.1 | 0.2 |
0.1Mpa-0.2Mpa No need high pressure rinse water | 48 |
5min/day |
HLDS132 | 0.1*2 | 0.1 | 0.3 | 96 | ||
HLDS133 | 0.1*3 | 0.1 | 0.4 | 144 | ||
HLDS201 | 0.37 | 0.37 | 0.74 | 32 | ||
HLDS202 | 0.37 | 0.37 | 1.11 | 64 | ||
HLDS203 | 0.37 | 0.37 | 1.48 | 96 | ||
HLDS301 | 0.75*1 | 0.75 | 1.5 | 40 | ||
HLDS302 | 0.75*2 | 0.75 | 2.25 | 80 | ||
HLDS303 | 0.75*3 | 0.75 | 3 | 120 | ||
HLDS304 | 0.75*4 | 0.75 | 3.75 | 160 | ||
HLDS401 | 1.1*1 | 0.75 | 1.85 | 80 | ||
HLDS402 | 1.1*2 | 0.75 | 2.95 | 160 | ||
HLDS403 | 1.1*3 | 0.75 | 4.05 | 240 | ||
HLDS404 | 1.1*4 | 0.75 | 5.15 | 320 |