Beer Production Factory Use Glass Bottle Filling Machine PLC Control

Glass bottle filling machine description:

This machine is designed and manufactured accoriding to foreign advanced technology, with years manufacuring and upgrading, our company produce this washing filling capping 3 in 1 monoblock machine for glass bottle wine. Rinsing clamp for glass bottle use Italian technology, manufacturing accuracy is very high, with high quality filling valve, our machine will control liquid level well with small fluid loss;This machine adopts aluminum cap capping system, tightly cover the bottle mouth with cap by seaming knife, the sealing effect is beautiful and the sealing property is good.

It is the ideal equipment for fresh beer, draft beer, beer and gas beverage manufacturers

Glass bottle filling machine features:

1. The transmission system of the whole machine is under the frame table, which adopts a main engine to drag and gear transmission to complete the power transmission of the whole machine. With high transmission efficiency, small noise, long life, easy maintenance, full lubrication and other characteristics. The frequency converter is used to control the speed of the main engine.

2. The transmission gear adopts the cross arrangement of steel gear and nylon gear.

3. The frame is equipped with centralized lubricating oil injection point, which is very convenient for operation and maintenance, and it is not necessary to drill into the frame for operation.

4. Machine structure is made of stainless steel, the frame is also covered with stainless steel door on four sides, the whole machine is good looking, and easy to wash and clean.

Glass bottle filling machine parameters:

Glass bottle filling machine details:

1. Bottle rinsing valve is good sealing, and it has long service life. The rinsing nozzle is is made of high quality material, which has large rinsing strength and high rinsing accuracy.

2. Simply turn the lifting screw of the punch spindle, and replace the dial of the corresponding bottle diameter, rinsing part can be used for bottle with different diameter and heigh.

3. In the middle of the bottle washing part, cylindrical pipe water distribution valve is used for water distribution. At the same time, the disc made of polytetrafluoroethylene is connected to each rinsing valve to ensure the water flow is stable and smooth in the process of high-speed rotary washing.

Thanks!

For more information please contact us!