EPOXY Coated Pressure Management Valve P26M For Water System / Irrigation System
Description:
P26M provides two adjustable pressure reducing pilots, one set to low pressure, the other to high pressure. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating relatively steady as the pilot set points. The high pressure pilot can be isolated by means of a battery operated latching solenoid. This solenoid is controlled using a fully programmable controlled which is user set to give higher and lower pressure based on time.
Feature:
• Multiple time selection possible (Max 6)
• Reduces system pressure when not needed (low flow demand or night time), supplies increased pressure when required (high flow demand or day time)
• Pressure Reducing Valve with two set points, high pressure and low pressure
Service Fields:
For water system, irrigation system.
In city with DMA management, water company can use Pressure Management Valve to control the pressure of each single isolated DMA and decrease the leakage without swapping the broken pipes. In such operation, water authority can decrease the leakage rate and NRW - Non Revenue Water issue.
Size | DN50-DN800 |
Working Temperature | - 10C- 80C |
Flange | AISI B16.1 Or PN16 |
Flow Media | Clean Water |
Series Description:
Pressure Management Valve Type Series description | ||
Type 1 | Type 2 | Type 3 |
Change Valve Pressure Based on Time | Change Valve Pressure Based on Flow Rate | Change Valve Pressure Based on Flow Rate Dynamically. |
Materials And Dimensions DN50-DN350
Materials And Dimensions DN400-DN800