Anti Water Hammer Surge Anticipate Valve With Nylon Reinforcement Diaphragm And Stainless Steel Pilots
Nylon Reinforcement Diaphragm Anti Water Hammer Surge anticipating Valve Stainless Steel Pilots Ductile Iron
A2A5 is a surge anticipation valve and can be adjusted to eliminate hazardous pressure surges typical of water hammer conditions. A water hammer is caused by abrupt shutoff of a pump or rapid closure of main valve, causing a fast propagation of low-pressure front, followed by an extremely high-pressure back-wave. A series of pressure waves, each one composed of alternating low and high pressure is created within a few seconds. A2A5 is a piloted hydraulic valve activated by line pressure. The valve has two pilots, for high and low pressure. Under normal conditions the A2A5 is closed. It opens when the line pressure drops below a preset pressure, in anticipation to the following surge, and remains open until the fluctuations subside.
Features:
• No slam operation
• Simple and reliable design
• Easy installation and maintenance
• Low Resistance and high flow capacity
• Protection for sewage as well as clean water pumping systems
Service Fields:
For water system, irrigation system.
Technical Data:
Size | DN50-DN800 |
Working Temperature | - 10C- 80C |
Flange | AISI B16.1 Or PN16 |
Flow Media | Clean Water |
Consult Factory for other applications
IP68 for water resistance
Comply with BS EN 1074-5, ISO 5208, BS EN 12266-1, BS EN 558-1
Materials And Dimension
DN50-DN350
DN400-DN800