Advanced design Anti Water Hammer Quick Close Non Slam Swing Check Valve
Description:
Non Slam Check Valve can have very short face to face distance, closing speed is so quick up to max 0.2sec and the stroke is only about 20% of valve bore diameter. It has hydrodynamic design with spring ensure non slamming and to minimize the water hammer. The advance diffuser design keep the streamline flow steady and reduces the water head loss to save pumping power. Overall it has a very low headloss and strong capability to minimize water hammer.
Features:
· High strength ductile iron body used for durability and less weight.
· Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss.
· One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve.
· Coated with powder epoxy both inside & outside for corrosion resistance.
· Bronze bushing reduce wearing problem during operation.
· Hydrodynamic design with spring ensures non slamming and water hammerless.
· Stainless steel spring hidden in the diffuser under protection while valve in operation.
· Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec.
· Installation can be vertical/horizontal/inclined.
· Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension.
Service Fields:
Mainly used for clean water, precleaned sewage water, Fire-fighting, Irrigation, Cooling and HVAC System.
Technical Data:
Size | DN50-DN600 |
Working Temperature | - 10C- 80C |
Flange | AISI B16.1 Or PN16 |
Flow Media | Clean Water |
Dimension:
DN50 - DN350
DN400 - DN600
Materials:
DN50-DN350