Wilo VeroLine IPL Centrifugal Pump for Heating Cooling and Chilled Water Systems with Light Weight Cast Iron Components

Product Overview: The Wilo-VeroLine-IPL is a glanded pump in in-line design for pumping hot water (in accordance with VDI 2035), chilled water, and water-glycol mixtures without abrasive substances in heating, chilled water, and cooling systems. It features multiple connection methods, advanced design and materials, reliable performance, and can meet the requirements of different working conditions. Wilo also provides a variety of related services to ensure its operation.

Advantages and Features

• Strong Anti-corrosion Performance: The cataphoretic coating provides high-standard anti-corrosion protection.

• Good Drainage Design: There are standard condensate drainage holes in the motor housing and lantern.

• Excellent Motor Structure: The series design adopts a motor with a one-piece shaft, and the version N is the standard motor V1 with a stainless steel plug shaft.

• Good Mechanical Seal: Bidirectional, force-flushed mechanical seal.

Environmental Characteristics

• The cast iron components have a compact structure and light weight.

• The production in European factories is sustainable and carbon-neutral.

• Design Structure: It is a single-stage, low-pressure centrifugal pump in in-line design, with mechanical seal, flange connection (with pressure measuring connection R 1/8), and a motor with a one-piece shaft.

• Application Range: Used for pumping specific media (without abrasive substances) in heating, chilled water, and cooling systems.

• Model Code Example: For example, IPL 40/160 - 4/2, where "IPL" represents an in-line pump, "40" is the nominal diameter DN of the pipe connection, "160" is the nominal impeller diameter, "4" is the rated motor power P2 (kW), and "2" is the number of poles.

Technical Data

• Temperature range: -20°C to +120°C.

• Power connection: 3~400V, 50Hz (other options can be provided upon request).

• Protection class: IP55.

• Nominal diameter: Rp 1 to DN 100.

• Maximum working pressure: 10 bar (special version: 16 bar).

Materials

• Pump housing and lantern: EN-GJL-250.

• Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on the pump type).

• Shaft: 1.4021.

• Mechanical seal: AQEGG, and other mechanical seals can be provided upon request.