Non-self-priming,high temperature(max. 180℃), high-efficiency multistage high-pressure centrifugal pump in vertical design with in-line connections

• Steam boiler
• Pharmacy
• Beverage
• Industrial high temperature heat pump

• Corrosion-resistant impellers, guide vanes and stage housings, all hydraulic parts 316L material.
• Special cooling chamber and air venter can reduce medium temperature around mechanical seal.
• New material of cast iron parts such as upper flange and baseplate for higher strength resistance.
• Specila gasket extend lifetime of O-rings in Tube liner.

• Typekey

  Example:	Medana XCV1-C.606-5/E/E/16O
  Medana	Product family – Surface pump
  X	Compact design with coupling
  C	Commercial series
  V	Vertical pump
  1	Series level (1 = entry level, 3 = standard level, 5 = premium level)
  C	Cast housing
  6	Volume flow in m3/h
  06	Number of impellers
  5	1 = Pump housing in stainless steel (1.4301)
  	2 = Pump housing 1.4409 (AISI 316L) Hydraulics 1.4404 (AISI 316L) only for PN 25 range
  	5 = Pump housing in cast iron (GJL250)
  E	E = EPDM seal
  E	E = 230/400 V - Frequency 50 Hz – Three-phase
  16	Nominal pressure in bar 16 = PN 16 20 = PN 20
  O	O = oval flange F = round flange

  Technical data

  • Electrical connection:
  • 3~380 V (±10 %), 50 Hz
    • ≤ 3 kW 220 V/ 380 V; Δ/Y
    • > 3 kW 380 V/ 660 V; Δ/Y
  • Fluid temperature range:
    • Medana XCV1-T: Min temperature -20°C, max temperature find pump nameplate
  • Max. operating pressure: 25 bar
  • Max. inlet pressure: P inlet + P at 0 flow ≤ P max pump operation
  • Min. inlet pressure: At least higher than medium vaporization pressure at the highest fluid temperature force height 1 bar
  • Protection class: IP 55
  • Max. ambient temperature: -15 ... +50 °C (extended temperature ranges on request)
  • Available configurations:
    • PN 25 with round flanges according to EN1092
    • PN 25 with tri-clamp connection according to DIN32676

  Materials

  Medana XCV1-T 2/4/6/10/16

  Standard version, Max operation pressure PN25.

  • Impellers, stage housings and guide vanes made of stainless steel 1.4404 (AISI 316L)
  • Pump housing made of stainless steel 1.4404 (AISI 316L)
  • Baseplate and upper flange in EN-GJS-400 (cataphoretic coated)
  • Lantern in EN-GJL-250 (cataphoretic coated)
  • Shaft made of stainless steel 1.4404 (AISI 316L)
  • Sleeve under the mechanical seal 1.4404 (AISI 316L)
  • O-ring of EPDM
  • Gasket of FKM
  • Tube made of stainless steel 1.4404 (AISI 316L)

  Construction

  • Pumps can be adapted to specific circumstances on request (e.g. motor protection, IE4 motor efficiency class, extended ambient temperature range).

  Scope of delivery

  • Medana XCV1-T high-temperature multistage centrifugal pump
  • Installation and operating instructions
  • Medana XCV1-T 2 kinds connection, round flange and Tri-clamp connection
  • Air venter optional

  Accessories

  Air Venter