PAR56 Replacement Bulbs Underwater Swimming Pool Lights With Remote Controller SS Housing IP68 For Niche Pool Lights

Description:

Can be replaced the halogen or LED PAR56 bulb of inground pool lights or fountain lights, all the niches lights, of low voltage, high effection, high brightness.

1,High brightness, engergy saving, enviornment protection and long lifespan LED
2,Adopt imported high brightness and High power LEDs, build-in constant current waterproof driver to ensure the lamp stable performance.
3,304 Stainless steel housing , and makes elegant appearance.
4,Use toughened glass with silicone rubber sealant and Internal with the epoxy resin sealant to ensure explosionproof, waterproof and dustproof.
5,Beam angle:10°,15°,30°,45°,60°,90°,120°
6,Colors: RGB, RED, BLUE, GREEN, WHITE, Warm white.
7,Can be connected RGB 7 colour controller or DMX control system

Color Rendering Index(CRI): Ra>80

Color Temperature(Color Temperture):
Cool white: 5000-6500K
Pure white: 4000-5000K
Warm white: 2700-3500K

Advantages:

1, Our led swimming pool light has certificates: CE, IP68 waterproof rate for swimming pool.
2, No mercury and lead pollution, no UV and IR Radiation.
3, Low heat, low degradation, 3%~5%(3000hours), life span:50000Hours
4, Energy Saving, Environment Friendly.
5, Easy installation, maintenance free of our LED swimming pool light

6, Replace PAR56 300W traditional halogen light.

Instructions of remote control

1) Continue pressing the button “A” to make the 3 group led change in seven stages:Red→green→blue→red+green→red+blue→green+blue→RGB

2) Continu pressing the button “B” to make the 3 group led change in 3 modes:

1.RGB gradient change

2.Disco mode

3.Blinking change

3) Pressing button “C” to adjust the speed of “A” and “B”

4) Pressing button “D” to switch on/off the led light

5) It will reset in 5 seconds after power off

6) The remote control can operate many led lights synchronously