Chinese Supplier Rubber Seated Water Gate Valve Flange End

1. PRODUCT PROFILE

Soft seated gate valves, in ductile iron GGG40 or GGG50 with flat body and EPDM covered wedge, are suitable for drinking water applications, being coated with epoxy powder painting, not toxic.The valve is made of high-quality rubber for the whole, the outer rubber, the domestic first-class rubber vulcanization technology enables the vulcanized valve to ensure accurate geometrical dimensions, and the rubber and ductile iron valves are then firm, not easy to fall off and elastic memory is good.The valve body is coated with powder epoxy to prevent corrosion and rust of the valve body. It can also be used in sewage systems. It is not easy to break. Traditional iron gate valves in the past often cause breakage due to impact, collision or overlap of foreign objects. Since the body is changed to ductile iron, this situation can be greatly reduced.

2. FEATURES

· Full bore design

· Low operating torque

· Every valve be 100% tested and qualified before packing and delivery

3. STANDARD

· Design & manufacturing:DIN3202-F5

· Face to face: EN558-1 series 3,14,15

· Flanged ends: ISO7005-2, EN1092-2, DIN2501 PN10/PN16

· Inspection & testing: EN12266-1

4. TECHNICAL SPECIFICATION

· Working pressure: PN10 / PN16 Bar

· Size: 2"-32"(DN50~800mm)

· Materials: cast iron, ductile iron

· Epoxy resin thickness: ≥250micron

· Applicable temperature: 0℃~+80℃

· Available with handwheel/square cap/gearbox/ electric actuator

5. APPLICATION

· Water supply system

· Waste water, sludge, sewage treatment industry

· Irrigation system

· Real estate industry

· Mining, steel industry

· Metallurgy plant, power plant

· Textile, pharmaceutical industry

· Food, pharmaceutical industry