DIN-F4 Rising Stem Metal Seated Gate Valve

1. PRODUCT PROFILE

DIN-F5 rising stem metal seated gate valves are primarily designed for the flow isolation of a length of pipeline or piece of equipment. It uses a ductile iron gate that houses bronze rings to ensure a watertight seal. The non-rising stem design ensures the stem thread is adequately lubricated by the water passing through the valve. In essence, the whole internals are water dependent for lubrication, a factor that safeguards the longevity of the valve.

2. FEATURES

· Unique lightweight ductile iron design

· WRAS listed fusion bonded epoxy coated

· Stem seals replaceable under pressure

· Full bore design

· Ductile iron body and bonnet for high strength and impact resistance

· Ductile iron gate with bronze seat on both the body and gate

· Back seal facility to allow replacement of stem seals under pressure

· Stem nut is separated from the gate for easy opening and closing

· Lifting eye bolts for easy installation (150 mm and over)

· Available in both clockwise and anti-clockwise closing

· Corrosion-resistant construction

· Integral feet to facilitate safe storage

· Robust low maintenance design suitable for buried service

3. STANDARD

· Design & manufacturing: EN1171/1074/DIN3202-F4/ F5/BS5163

· Flanges and Drillings: BS EN 1092-2

· Face to Face Dimensions: BS E N 558

4. TECHNICAL SPECIFICATION

· Size: 2″~12″ (DN50~300mm)

· Materials: cast iron, ductile iron

· Working pressure: PN10 / PN16 Bar

· Epoxy resin thickness: ≥250micron

· Applicable temperature: 0℃~+80℃

· Available with handwheel/square cap/gearbox/ electric actuator

5. APPLICATION

· Water supply system

· Waste water, sludge, sewage treatment industry

· Irrigation system

· Real estate industry

· Mining, steel industry

· Metallurgy plant, power plant

· Textile, pharmaceutical industry

· Food, pharmaceutical industry