Flange End Quick Adaptor For PE

Quick Flange Adaptor For PE

1. PRODUCT PROFILE

Quick adaptor is used in PVC/PE pipe. It has a gasket and a restrained brass rings (alternative) .When you put the pipe in the adaptor body and fasten the bolts, the brass ring will fasten the pipe to avoid it pull out. The expansion joint has a certain multi-directional displacement effect in the operation of the pipeline, and has an important expansion and compensation effect on the pipeline due to thermal expansion and contraction, crustal subsidence and stress during operation. Therefore, the expansion joint can alleviate the blind plate in the pipeline operation. The thrust can protect the pipeline to a certain extent, especially it provides great convenience for the installation and maintenance of the pipeline.

2. FEATURES

· ±25mm longitudinal adjustment simplifies future pipework modifications, reducing down time

· Can be locked at required length with tie rods supplied

· FBE anticorrosive coated make long service life

· Both restrained or un-restrained styles for selection

· The dismantling joint is particularly suitable for simplifying the installation and removal of valves, pipes and fittings of non-return valves, check valve, isolation valve, control valve, flow metering equipment, pump sets, pressure reducing valve, flanged pipe and fitting.

3. TECHNICAL SPECIFICATION

· Ductile iron

· DN50—400mm

· PN10/16

4. STANDARD

· Design & manufacturing: ISO, BS/EN, AWWA /ANSI

· Face to face: ISO2531, BS EN545

· Flange ends: AS/BS table D/E, ANSI B16.1/16.5, EN1092

· Inspection & testing: API598

5. APPLICATION

· Typical applicable industry:

· Sewage treatment works

· Water treatment works

· Power generation equipment

· Gas distribution station

· Industrial cooling systems

· Pumping station