500lph Water Purification System Water Treatment Softener System

specifications

Softening water equipment workflow
Work (sometimes called water production, the same below), backwash, salt suction (regeneration), slow rinse (replacement), quick rinse five processes.All the procedures of different softening water equipment are very similar, but there may be some additional procedures due to the different actual process or the need of control.Any sodium-exchange based water softening equipment has been developed on the basis of these five processes (among them, fully automated water softening equipment will add a brine reinjection process).
Backwash: after working for a period of time, the equipment will block a lot of dirt brought by raw water in the upper part of the resin. After removing these dirt, the ion exchange resin can be fully exposed, and the effect of regeneration can be guaranteed.In the backwash process, water is washed in from the bottom of the resin and out from the top, so that dirt trapped at the top can be washed away.This process usually takes about 5-15 minutes.

Packaging & Shipping

About packaging, for small size or single machine, we can offer free fumigation wooden case with steel frame,

it not only can protect machine from damage, but also avoid checking when exporting. For multiple machines

or production line,

it's better to loaded in standard container 20GP, 40GP, 40HQ, usually it needs wrapped with plastic firstly,

then loaded in containe

Water Softener is one kind of water treatment plant that can reduce water hardness and make it soft. Its working principle is using sodium cation

exchange resin to eliminate calcium and magnesium ions in the water. It is mainly use to reduce raw water hardness and advoid carbonates

fouling in the pipeline, container and boiler, etc. The effectiveness reaches 99%.