Self Adhesive Waterproofing Membrane For Underground Structures
modified asphalt waterproofing membrane Description
Composition:
- Base Layer: Polymer-modified asphalt compound
- Reinforcement: Polyester or fiberglass mat
- Adhesive Layer: Self-adhesive polymer compound
- Release Film: Removable silicone-coated film
The Self-Adhesive Polymer Modified Asphalt Waterproofing Membrane offers a versatile and user-friendly waterproofing solution, providing reliable performance and easy installation for a wide range of waterproofing applications.
Wet Laying Waterproofing Membrane Application
- Roofing Systems: Flat roofs, sloped roofs, roof terraces, and green roofs
- Below-Grade Waterproofing: Basements, foundations, and underground structures
modified asphalt waterproofing membrane specification
Item | Standard Requirements |
Model | Type 1, Type II |
Coil length | 7.5m,10m |
Coil width | 1m |
Coil thickness | 3mm,4mm |
Coil area | 7.5m,10m |
Upper surface barrier | Polyethylene film(PE),Fine sand(S),Silicon coated barrier film |
Lower surface isolation material | Silicon coated barrier film |
modified asphalt waterproofing membrane Features:
Reinforcement:
The membrane is reinforced with a polyester or fiberglass mat, which improves the dimensional stability, tensile strength, and tear resistance of the system.
Self-Adhesive Technology:
The key feature of this membrane is the self-adhesive polymer compound on the underside of the product. This eliminates the need for torch-applied or mechanical fastening, simplifying the installation process and providing a seamless, monolithic waterproofing layer.
Release Film:
The self-adhesive layer is protected by a removable silicone-coated release film, which is peeled off during installation to expose the adhesive surface.