Reactive Sticky High polymer strong cross membrane Wet laying waterproofing membrane

High polymer strong cross membrane Description

This product is based on petroleum asphalt, styrene-butadiene-styrene block copolymer (SBS), styrene-butadiene rubber (SBR), tackifier resin as modifier, polyester tire base as additive.
(SBS), styrene-butadiene-styrene block copolymer (SBR), tackifier resin as modifier, polyester base as reinforcing layer, covered with polyethylene film (PE), fine sand (S).
Stronger layer, covered with polyethylene film (PE), fine sand (S) or coated with silicone isolation membrane made of
waterproofing membrane.

High polymer strong cross membrane Application

This product is suitable for underground base plate, side wall waterproofing project, can also be used for other parts of the waterproofing project constructed by pre-laying and anti-adhesive method.
The product is suitable for waterproofing of underground baseboard and side wall, and can also be used in other parts of waterproofing project constructed by pre-laying and anti-adhesive method.

High polymer strong cross membrane Features:

1. puncture resistance, slight breakage resistance, tear resistance;
2. Good high and low temperature performance, long-lasting adhesion;
3. High tensile strength, high elongation, strong adaptability to grass-roots contraction and deformation and cracking;
4. coil laying can be directly after the upper part of the binding steel, do not need to play the protective layer, shorten the construction period.
Shorten the construction period;
5. For the grass-roots requirements are not high, especially suitable for the rainy season is long, humid environment of the waterproof construction.
Waterproof construction;
6. Applicable to winter construction, not subject to low-temperature environment construction restrictions.