Features of 80W UV Light Curing Light:

• Long Life: the Service Life is More Than 10 Times That of the Traditional Lamp Machine.
• Cold Light Source, No Heat Radiation, the Surface Temperature of the Illuminated Product is Low, Solving the Traditional Heat Injury Problem.
• The Heat is Small, Can Solve the Problem of Large Heat Generation of Traditional Equipment.
• Instant Lighting, No Need to Preheat to Instantly Achieve 100% Power UV Output.
• The Service Life is Not Affected by the Number of Opening and Closing.
• High Energy, Stable Light Output, Uniform Illumination Effect, Improve Production Efficiency.
• It Does Not Contain Mercury and Does Not Produce Ozone. It is a Safer and More Environmentally Friendly Alternative to Traditional Light Source Technology.
• Low Energy Consumption, Power Consumption is Only 10% of the Traditional Lamp Type, Can Save 90% of Electricity.
• Maintenance Costs Are Almost Zero.

Specifications of 80W UV Light Curing Light:

More pictures of 80W UV Light Curing Light:

Much biomedical research focuses on the effects of UV light on human cells. UV light sources are a prerequisite for such research. This paper presents the design and achieved performance of a UVA (Ultraviolet A: 320–400 nm) and a UVB (Ultraviolet B: 290–320 nm) LED-based lamp suitable for use in bioassays, as well as inside an incubator. Numerical simulations were used to optimise the number, layout and output power of LEDs to achieve good irradiance homogeneity while maintaining low costs. Design was optimised for the efficient transfer of generated heat away from the irradiated samples through the heatsink at the back of the lamps. The average irradiance of the target surface by the UVA lamp was 70.1 W/m2 with a maximum deviation of 4.9%, and the average irradiance by the UVB lamp was 3.1 W/m2 with a maximum deviation of 4.8%. With the UVA and UVB lamps, the temperature of samples undergoing irradiation in the incubator rises from 37 to 42 °C within 40 and 67 min, respectively. This by far exceeds the required UV irradiation time in most cases. Tests on Jurkat and HEK-293 cell cultures confirmed the suitability of our lamps for biomedical research.

Application of 80W UV Light Curing Light:

1. Adhesive Bonding – The UV curing light is used in the adhesive bonding process to fix two or more surfaces together. The adhesive is applied, and then the UV light is used to cure and harden the adhesive.

2. Coatings – A range of coatings, including protective coatings, decorative coatings, and functional coatings, can be cured using the 80W UV curing light.

3. Dental Fillings – The UV light is used to cure composite resins that are used in dental fillings. The light reacts with a photoinitiator in the composite resin, which causes it to harden.

4. Medical Devices – The 80W UV curing light is used in the production of medical devices, including catheters, pacemakers, and ostomy bags. It is used to cure the adhesives that hold the components together.

FAQ:

1. What about the lead time?

A: Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than

2. What's the guarantee time for the products?

A: We offer 3-5 years warranty for all products.

3. How can I get a price of needed product?

A:

1. Please give your exactly specs details to us. We can give you a sample and price according to your specification.

2. You can send us a sample, we can give you a counter sample and price according to your sample.

3. If you don't know any specification, You can give us the pictures of the product, and the usage, we can give you a estimated price according to our experience. But exactly price must after we checking your original sample.