Product Description:
Product Name: | BWD-01 Water Decoloring Agent | Component: | Dicyandiamide-formaldehyde Resin |
Solid Content: | 50%min | CAS No.: | 55295-98-2 |
Brand: | Bluwat | Other Name: | Color Removal Chemical; Decolorant; Decolorization Chemical; Dicyandiamide-formaldehyde Resin Flocculant |
Application: | Waste Water Color Treatment | Decolorization: | 50~99% |
Sample: | Free to Test | Certificates: | ISO, SGS |
Specifications:
Appearance: | Translucid Liquid and Colorless |
Solid Content: | 52% |
Specific Gravity at 20°C: | 1.1-1.3 |
PH Value (30% Solution): | 3-6 |
Viscosity(25°C,cps): | 50-300 |
Solubility: | Soluble With Water at Any Rate |
Package: | 30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
What is BWD-01 Water Decolorant Agent Used for?
| |||
What is the Advantage of BWD-01?
|
Liquid type easy to use, non-toxic, not corrosive
High efficient decolorization for different dye effluent color treatment
Application Case: | ||
A. When have biological treatment first and after they make chemical treatment. | B. When they are treated first with chemicals, then the usual dosages are: | |
1. | Test and adjust the pH of the effluent to 8-9 | |
2. | First, we apply the PAC (contact time 3-5 min with the wastewater), after then BWD-01 Water Decoloring Agent (contact time 5-10 min), and after then anionic polyacrylamide. | |
3. | It will give too much economy if we'll adjust the pH 8-9, otherwise, the consumption of BWD-01 will be ~20% higher. | |
Dosage: | ||
50-80 ppm BWD-01(raw) | 80-100 ppm BWD-01(raw) | |
15-20ppm Polyaluminum Chloride(solid) | 15 -30 ppm PAC(solid) | |
1 - 2 ppm Anionic polyacrylamide(solid) | 1 - 2 ppm Anionic polyacrylamide(solid) |
Package and Storage: |