Paper Making Effluent Water Decoloring Agent Light Color Liquid PH 1.5 - 3.0
Specifications:
Appearance | Colorless or Light-color liquid |
Solid Content | ≥50% |
Specific Gravity at 20°C | 1.1-1.3 |
PH Value (30% water Solution) | 2.5-5.0 |
Viscosity(25°C,mPa.s) | 5-50 |
CAS No | 55295982 |
Advantage:
1. Free samples
2. De-color high-colority effluent from dyestuffs plants..
3. Stronger decolorization (50%~99%) and removal of COD (50%~80%).
Application Method:
1. CW-07 shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. Should adjusted the pH value of the waste water to 7~8 for better result.
3. When the colority and COD are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process.
Package and Storage:
1. Harmless, non-flammable and non-explosive.
2. Can not be placed in the sun.
3. 30kg, 50kg, 250kg ,1000kg, 1250kg IBC tank or others according to your requirements.
4. Storage temperature: 5-30°C
Usages:
CW-07 mainly used for color removal treatment for high-colority waste water. It is suitable to treat waste water with activated, acidic and disperse dyestuffs. It can also be used to treat waste water from textile industry and dye houses, pigment industry, printing ink industry and paper industry.