CW 05 Series paper color removal cationic polyacrylamide for chemical , Flocculant Agent
Brief Description:
Dicyandiamide formaldehyde CW-05 resin for Pigment waste water treatment.
Specifications:
Appearance: | colorless or light-color sticky liquid |
Solid Content: | more than 50% |
Specific Gravity at 20°C: | 1.1-1.3 |
PH Value (30% water Solution): | 2.5-3.0 |
Viscosity(25°C,mPa.s): | 5-50 |
Solubility: | Dissolve in Water absolutely |
Package: | Packed with 25kgs / 250kgs / 1250kgs drum |
Storage Temperature: | Room temperature , for a long-term storage |
Advantage:
1,manufacturer
2,experience since 1985
3,free sample for you
4, Can remove color also can reduce COD
5,Strong decolorization (85-95%)
6, Faster sedimentation, better flocculation
7,NO aluminum, chlorine, heavy metal ions,etc
Application:
1. It is mainly used for waste water treatment for textile, printing, dyeing, paper-making, mining, ink, and so on.
2. It can be used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
Application Method:
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly.
After several minutes, it can be precipitated or air-floated to get clear water.
2. The pH of the waste water should be adjusted to 6-10 for better result.
3. polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride used earlier or later depends on the flocculation test and the treatment process.
Package and Storage:
1.It is harmless, non-flammable and non-explosive, it can not be placed in the sun.
2. It is packed in plastic drums with each containing 30kg, 50kg, 250kg , 1000kg, 1250kg IBC tank or others according to your requirements; One container could load 20~23 tons.
3. This product will appear layer after a long-term storage